Compaction Rammer, Light — 2.6 kg, 310 mm Drop
Standard Proctor rammer for the light compaction test — 2.6 kg mass falling through 310 mm.
Typical applications
- Standard Proctor moisture–density relationship
Conforms to
- IS 2720 (Part 7)—Determination of water content–dry density relation using LIGHT compaction
- IS 9198—Compaction rammer for soil testing — Specification
- ASTM D698—Standard Effort Compaction Characteristics of Soil
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
IS 2720 Part 7 is the LIGHT compaction test and Part 8 is the HEAVY compaction test. Several supplier catalogues print these the wrong way round on the rammer listings — check the mass and drop, not the part number, when comparing quotations.Specification
| Rammer mass | 2.6 kg |
|---|---|
| Free fall | 310 mm |
| Face diameter | 50 mm |
| Guide | Vented sleeve |
Support available
- Calibration
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
CBR Testing Machine, Motorised, with Proving Ring
Motorised load frame for determining the California Bearing Ratio of subgrade and pavement layer materials.
IndentIS 2720 (Part 16)Frame capacity: 50 kN
Specification for CBR Testing Machine, Motorised, with Proving Ring
Specification for CBR Testing Machine, Motorised, with Proving Ring Frame capacity 50 kN Penetration rate 1.25 mm/min (fixed, as specified) Mould 150 mm ø × 175 mm with collar and perforated base Penetration piston 50 mm ø × 100 mm long Surcharge weights 2.5 kg annular and slotted Proving ring 10 kN with 0.002 mm dial gauge Power 415 V, 3-phase or 230 V single-phase to order Site preparation Required — foundation or utilities Services Installation & commissioning · Calibration · Operator training · Annual maintenance contract · Spares & consumables Standards
IS 2720 (Part 16)IS 9669ASTM D1883Typical applications
- CBR of subgrade, sub-base and base course materials
- Pavement thickness design input
Full record, hazard data and enquiry for CBR Testing Machine, Motorised, with Proving Ring →
Liquid Limit Device (Casagrande), Hand Operated
Casagrande cup apparatus for determining the liquid limit and, with the grooving tools, the plasticity characteristics of soil.
Ex-stockIS 2720 (Part 5)Cup: Brass, standard Casagrande profile
Specification for Liquid Limit Device (Casagrande), Hand Operated
Specification for Liquid Limit Device (Casagrande), Hand Operated Cup Brass, standard Casagrande profile Drop height 10 mm, set with the supplied gauge block Grooving tools Casagrande and ASTM patterns supplied Base Standard hard rubber Counter Mechanical blow counter Services Calibration · Spares & consumables Standards
IS 2720 (Part 5)IS 9259ASTM D4318BS 1377-2Typical applications
- Liquid limit of fine-grained soils
- Soil classification for pavement and foundation design
Full record, hazard data and enquiry for Liquid Limit Device (Casagrande), Hand Operated →
Compaction Rammer, Heavy — 4.89 kg, 450 mm Drop
Modified Proctor rammer for the heavy compaction test — 4.89 kg mass falling through 450 mm.
Ex-stockIS 2720 (Part 8)Rammer mass: 4.89 kg
Specification for Compaction Rammer, Heavy — 4.89 kg, 450 mm Drop
Specification for Compaction Rammer, Heavy — 4.89 kg, 450 mm Drop Rammer mass 4.89 kg Free fall 450 mm Face diameter 50 mm Services Calibration · Spares & consumables Standards
IS 2720 (Part 8)IS 9198ASTM D1557Typical applications
- Modified Proctor moisture–density relationship for heavily loaded pavements
Full record, hazard data and enquiry for Compaction Rammer, Heavy — 4.89 kg, 450 mm Drop →
Direct Shear Apparatus, Motorised
Shear box apparatus for determining the cohesion and angle of internal friction of soil.
IndentIS 2720 (Part 13)Shear boxes: 60 × 60 mm and 100 × 100 mm
Specification for Direct Shear Apparatus, Motorised
Specification for Direct Shear Apparatus, Motorised Shear boxes 60 × 60 mm and 100 × 100 mm Strain rates Multi-speed gearbox, typically 0.00012–1.25 mm/min Normal load Lever-arm loading yoke with weights Measurement Proving ring and dial gauges, or load cell and LVDT Services Installation & commissioning · Calibration · Operator training · Annual maintenance contract · Spares & consumables Standards
IS 2720 (Part 13)IS 11229ASTM D3080Typical applications
- Shear strength parameters c and φ for foundation and slope design
Full record, hazard data and enquiry for Direct Shear Apparatus, Motorised →
