Safety & PPE
Eye protection, gloves, lab coats, respiratory protection, spill control, eyewash stations and chemical storage.
8 categories · 333 published records. The catalogue we can supply is broader than the catalogue we publish — send us the item if you cannot find it.
Before you order
The category most often left until after an audit finding. A laboratory handling concentrated acids needs a compliant eyewash within ten seconds of the point of use, correct glove chemistry for the substances in play, and a spill kit sized to the largest container on the shelf. We will size it against your actual chemical register if you send it.
4 records
Cannot find it? Ask on WhatsApp →Chemical Splash Goggles and Face Shields
Indirect-vent chemical splash goggles and full face shields for handling corrosives.
Ex-stockSpecification for Chemical Splash Goggles and Face Shields
Specification for Chemical Splash Goggles and Face Shields Material Polycarbonate Ventilation Indirect vent — required for liquid splash protection Lens Polycarbonate, anti-fog and anti-scratch coated Face shield 200 mm visor with ratchet headgear Standards
EN 166IS 8940Typical applications
- Handling acids, alkalis and solvents
- Cryogenic and pressure work
Full record, hazard data and enquiry for Chemical Splash Goggles and Face Shields →
Chemical Resistant Gloves — Nitrile, Neoprene and Butyl
Disposable and reusable chemical-resistant gloves selected by breakthrough time against the substances in use.
Ex-stockSpecification for Chemical Resistant Gloves — Nitrile, Neoprene and Butyl
Specification for Chemical Resistant Gloves — Nitrile, Neoprene and Butyl Material Nitrile / Neoprene / Butyl rubber / PVA Nitrile disposable Incidental contact, powder-free, 4–8 mil Neoprene Acids, bases, alcohols — good general chemical range Butyl Ketones, esters, DMSO — best for polar aprotic solvents PVA Aromatic and chlorinated solvents. Not water-compatible Sizes S, M, L, XL Standards
EN 374Typical applications
- Chemical handling
- Sample preparation
- Spill response
Full record, hazard data and enquiry for Chemical Resistant Gloves — Nitrile, Neoprene and Butyl →
Emergency Eyewash Stations and Safety Showers
Wall-mounted, pedestal and combination eyewash and drench shower units, plus portable gravity-fed eyewash.
IndentSpecification for Emergency Eyewash Stations and Safety Showers
Specification for Emergency Eyewash Stations and Safety Showers Eyewash flow ≥ 1.5 L/min for 15 minutes, tepid Shower flow ≥ 60 L/min for 15 minutes Activation Stay-open valve, one second or less Construction Stainless steel or ABS-coated Standards
ISO EN 15154Typical applications
- Emergency response in laboratories handling corrosives
Full record, hazard data and enquiry for Emergency Eyewash Stations and Safety Showers →
Chemical Spill Kits — Acid, Alkali, Solvent and Mercury
Sized spill kits with neutralising absorbent, PPE, disposal bags and a written procedure card.
Ex-stockSpecification for Chemical Spill Kits — Acid, Alkali, Solvent and Mercury
Specification for Chemical Spill Kits — Acid, Alkali, Solvent and Mercury Acid kit Neutralising absorbent with colour-change indicator Alkali kit Citric-acid based neutraliser Solvent kit Inert polypropylene absorbent, non-sparking scoop Mercury kit Amalgamating powder, aspirator and indicator powder Sizes 5 L, 20 L and 50 L absorbent capacity Typical applications
- Spill response and containment
Full record, hazard data and enquiry for Chemical Spill Kits — Acid, Alkali, Solvent and Mercury →
What laboratories usually order alongside this.
Borosilicate 3.3 Glassware
Beakers, flasks, condensers, reagent bottles, funnels and extraction assemblies in low-expansion borosilicate glass.
Plasticware
Polypropylene, HDPE, PTFE and PMP labware — cylinders, bottles, carboys, tubes, tips and racks.
Filtration
Qualitative, quantitative and ashless filter papers, membrane and glass-fibre filters, sintered funnels and vacuum assemblies.
Class A is a tolerance. It is not a calibration.
This distinction costs accredited laboratories real audit findings. Class A volumetric ware carries roughly half the tolerance of Class B and ships with a conformity certificate for the batch. Class AS adds a specified delivery time on pipettes and burettes.
But a conformity certificate is a manufacturing statement, not a traceable calibration. If your laboratory holds a NABL scope, that Class A flask still needs periodic calibration under a volume scope, with a certificate showing the traceability chain. Buying Class A does not discharge the obligation.
Read the TC/“In” and TD/“Ex” markings too — To Contain and To Deliver are not interchangeable, and the calibration temperature (conventionally 20 °C) is on the item for a reason.
On glass: Borosilicate 3.3 is a glass specification under ISO 3585, not a brand. It designates a coefficient of linear expansion of about 3.3 × 10⁻⁶ K⁻¹ — the property that gives thermal shock resistance and chemical durability. Soda-glass equivalents cost less and crack on a hot plate.
On safety: this is the category most often left until after an audit finding. Send us your chemical register and we will size the eyewash provision, map glove chemistry to breakthrough times, and specify a spill kit against the largest container on your shelf rather than against a typical spill.
