Industries served

Every sector has one pressure point that decides whether a supply relationship works — pharmacopoeial paperwork, standard revisions, residue-grade solvents, consumable continuity. These pages name it.

Pharmaceutical & Life Sciences

Pharmacopoeial-grade reagents, qualified instruments and the documentation an inspector expects to see alongside them.

Tests these labs run

Assay and related substances by HPLC
Dissolution and content uniformity
Loss on drying and water content by Karl Fischer
Microbial limit testing and sterility
Residual solvents by GC headspace
Stability studies under ICH conditions

What this sector orders →

Construction Materials Testing

Civil engineering testing instruments built to current IS, ASTM and BS standards, with the standard numbers checked rather than copied.

Tests these labs run

Compressive strength of concrete cubes and cylinders
Cement consistency, setting time, fineness and soundness
CBR, compaction and Atterberg limits on soil
Los Angeles abrasion, impact and crushing value on aggregate
Bitumen penetration, softening point and ductility
Marshall mix design for bituminous concrete
Non-destructive testing — rebound hammer and pulse velocity

What this sector orders →

Water & Environmental Testing

Reagents, standards and instruments for drinking water, effluent, ambient air and soil contamination analysis.

Tests these labs run

BOD, COD and total organic carbon
Total hardness, alkalinity and chloride by titration
Heavy metals by AAS and ICP
Total and faecal coliform by membrane filtration
Total suspended and dissolved solids
Residual chlorine, fluoride and nitrate
Jar test for coagulant dose optimisation

What this sector orders →

Food, Feed & Agriculture

Analytical reagents, pesticide-residue solvents and instrumentation for food safety and agricultural testing laboratories.

Tests these labs run

Crude protein by Kjeldahl
Crude fat by Soxhlet extraction
Moisture, ash and crude fibre
Pesticide residues by GC-MS and LC-MS/MS
Heavy metals by AAS
Aflatoxin and mycotoxin screening
Microbiological plate counts and pathogen detection

What this sector orders →

Education & Research

Teaching laboratory supply at sensible grades and pack sizes, plus research-grade reagents for funded projects.

Tests these labs run

Volumetric and gravimetric analysis practicals
Qualitative inorganic and organic analysis
Physical chemistry and instrumentation practicals
Microbiology and biochemistry laboratory courses
Funded research across synthesis, analysis and materials

What this sector orders →

Industrial Quality Control

In-house QC laboratories in cement, steel, textiles, polymers, paints and petrochemicals.

Tests these labs run

Chemical analysis of cement and clinker
Ash, moisture and calorific value of fuels
Tensile, hardness and impact testing of metals
Viscosity, density and flash point of petroleum products
Polymer melt flow index and thermal analysis
Colour, gloss and adhesion of coatings

What this sector orders →

Cement Manufacturing

Physical and chemical testing for cement works, grinding units and blending plants — fineness, setting, soundness, strength and oxide analysis.

Tests these labs run

Fineness by Blaine air permeability and by dry sieving
Standard consistency and setting time by Vicat apparatus
Soundness by Le Chatelier and by autoclave expansion
Compressive strength of cement mortar cubes
Oxide analysis, loss on ignition and insoluble residue
Chloride, sulphate and alkali content
Heat of hydration and drying shrinkage

What this sector orders →

Ready-Mix Concrete (RMC) Plants

Plant and field laboratory equipment for RMC producers — cube testing, workability, aggregate control and the mix design that has to hold on site.

Tests these labs run

Compressive strength of concrete cubes at 7 and 28 days
Slump, compacting factor and flow table for workability
Fresh concrete density, temperature and air content
Sieve analysis, silt content and moisture correction on aggregate
Specific gravity and water absorption of coarse and fine aggregate
Trial mixes and verification of mix proportions
Chloride content and pH of mixing water

What this sector orders →

Tile & Ceramics

Testing for tile bodies, glazes and whiteware — water absorption, breaking strength, abrasion, chemical resistance and raw-material control.

Tests these labs run

Water absorption, apparent porosity and bulk density
Modulus of rupture and breaking strength
Surface abrasion of glazed tiles and deep abrasion of unglazed
Resistance to staining, acids and alkalis
Crazing resistance and thermal shock
Linear thermal expansion and moisture expansion
Loss on ignition and oxide analysis of body and glaze raw materials
Particle size and sieve residue on milled slip

What this sector orders →

Glass & Glass Containers

Testing for flat, container and pharmaceutical glass — thickness and stress, fragmentation, thermal shock and hydrolytic resistance.

Tests these labs run

Hydrolytic resistance of glass grains and of container inner surfaces
Surface and edge stress by photoelastic measurement
Fragmentation count on thermally toughened glass
Thermal shock and thermal endurance
Thickness, bow and optical distortion on flat glass
Internal pressure and vertical load resistance of containers
Residual strain by polariscope
Light transmission and arsenic on pharmaceutical containers

What this sector orders →

Steel & Metallurgical

Mechanical testing, spectrometry and metallography for steel plants, re-rolling mills, foundries and forging shops.

Tests these labs run

Tensile, yield and elongation on machined specimens and full-section bar
Charpy V-notch impact at ambient and sub-zero temperature
Brinell, Rockwell and Vickers hardness
Bend and rebend tests on reinforcement bar
Carbon, sulphur, phosphorus and alloying elements by spark OES
Carbon and sulphur by combustion infrared absorption
Grain size, inclusion rating and decarburisation depth by microscopy
Coating mass and adhesion on galvanised product

What this sector orders →

Paint & Coatings

Testing for decorative, industrial and protective coatings — viscosity, drying, adhesion, gloss, film thickness and accelerated weathering.

Tests these labs run

Viscosity by flow cup, Krebs-Stormer and rotational viscometer
Drying time — surface dry, hard dry and through dry
Adhesion by cross-cut and by pull-off
Specular gloss at 20°, 60° and 85°
Dry film thickness on ferrous and non-ferrous substrates
Salt spray, humidity and accelerated UV weathering
Scratch, impact, bend and Taber abrasion resistance
Volatile and non-volatile content, and lead by AAS

What this sector orders →

Petroleum, Fuels & Lubricants

Testing for refineries, blending plants, lubricant manufacturers and fuel depots — flash, viscosity, distillation, sulphur and contamination.

Tests these labs run

Flash point by Abel, Pensky-Martens and Cleveland open cup
Kinematic viscosity at 40 °C and 100 °C, and viscosity index
Density and API gravity by hydrometer and by digital density meter
Distillation range at atmospheric pressure
Pour point, cloud point and cold filter plugging point
Total sulphur by X-ray fluorescence or UV fluorescence
Acid number, base number and water by Karl Fischer
Ash, carbon residue and copper strip corrosion

What this sector orders →

Plastics, Fibre & Fibreglass

Testing for polymer compounders, film and pipe extruders, moulders and GRP fabricators — melt flow, tensile, impact, thermal and glass content.

Tests these labs run

Melt flow index at stated temperature and load
Tensile strength, elongation and modulus
Flexural strength and modulus
Izod and Charpy notched impact
Heat deflection temperature and Vicat softening point
Density, ash and carbon black content
Intrinsic viscosity of PET
Glass content by loss on ignition and Barcol hardness on GRP laminates

What this sector orders →

Rubber & Elastomers

Testing for tyre, hose, belt, moulded-goods and latex manufacturers — cure characteristics, tensile, hardness, ageing and abrasion.

Tests these labs run

Cure characteristics by moving die rheometer — ts2, t90 and torque
Mooney viscosity and Mooney scorch
Tensile strength, modulus and elongation at break
Shore A durometer and IRHD hardness
Compression set and tear strength
Abrasion resistance by rotating cylindrical drum
Accelerated ageing in an air oven and ozone resistance
Volume change after fluid immersion, and ash and carbon black content

What this sector orders →

Geotextiles & Geosynthetics

Index and performance testing for woven and non-woven geotextiles, geogrids, geomembranes and geocomposites in road, landfill and drainage works.

Tests these labs run

Wide-width tensile strength and elongation
Grab tensile strength
CBR static puncture resistance
Trapezoidal tear strength
Characteristic opening size by wet or dry sieving
Water permeability normal to the plane
Mass per unit area and thickness at specified pressures
Retained strength after accelerated UV exposure

What this sector orders →

Textiles & Apparel

Fibre, yarn, fabric and garment testing for spinning mills, processing houses and export units — strength, colour fastness, shrinkage and restricted substances.

Tests these labs run

Tensile and tear strength of woven fabric
Bursting strength of knitted fabric
Colour fastness to washing, rubbing, perspiration and light
Dimensional change after washing and drying
Mass per unit area, ends and picks, and fabric thickness
Yarn count, twist, evenness and single-yarn strength
Pilling and Martindale abrasion resistance
Fibre blend composition by chemical dissolution, and pH of aqueous extract

What this sector orders →

Packaging — Paper, Board & Corrugated

Testing for paper mills, corrugators, box plants and packaging users — bursting strength, crush resistance, Cobb, grammage and transit performance.

Tests these labs run

Bursting strength of paper and of corrugated board
Edge crush, flat crush, ring crush and Concora crush
Box compression and stacking
Cobb water absorbency and grammage
Tensile, tear and puncture resistance
Moisture content and ply bond
Drop, vibration and incline impact on filled packages
Seal integrity and leak testing on flexible packs

What this sector orders →

Dairy Processing

Reagents, glassware and instruments for milk reception, process control and finished-product testing at dairies and chilling centres.

Tests these labs run

Fat by Gerber, and solids-not-fat by lactometer
Titratable acidity and pH
Clot-on-boiling and alcohol stability
Methylene blue reduction test and standard plate count
Coliform, yeast and mould counts
Alkaline phosphatase for pasteurisation efficacy
Added water by freezing point depression
Adulterant, neutraliser and antibiotic residue screening

What this sector orders →