Emergency Eyewash Stations and Safety Showers
Wall-mounted, pedestal and combination eyewash and drench shower units, plus portable gravity-fed eyewash.
Typical applications
- Emergency response in laboratories handling corrosives
Conforms to
- ISO EN 15154—Emergency safety showers and eyewash equipment
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
Reachable within ten seconds and on the same level as the hazard, with no door in between — that is the accepted siting rule and it is what gets written up in audits. Portable gravity-fed units are a stopgap, not a substitute for plumbed equipment.Specification
| Eyewash flow | ≥ 1.5 L/min for 15 minutes, tepid |
|---|---|
| Shower flow | ≥ 60 L/min for 15 minutes |
| Activation | Stay-open valve, one second or less |
| Construction | Stainless steel or ABS-coated |
Related products
Chemical Splash Goggles and Face Shields
Indirect-vent chemical splash goggles and full face shields for handling corrosives.
Ex-stockSpecification for Chemical Splash Goggles and Face Shields
Specification for Chemical Splash Goggles and Face Shields Material Polycarbonate Ventilation Indirect vent — required for liquid splash protection Lens Polycarbonate, anti-fog and anti-scratch coated Face shield 200 mm visor with ratchet headgear Standards
EN 166IS 8940Typical applications
- Handling acids, alkalis and solvents
- Cryogenic and pressure work
Full record, hazard data and enquiry for Chemical Splash Goggles and Face Shields →
Chemical Resistant Gloves — Nitrile, Neoprene and Butyl
Disposable and reusable chemical-resistant gloves selected by breakthrough time against the substances in use.
Ex-stockSpecification for Chemical Resistant Gloves — Nitrile, Neoprene and Butyl
Specification for Chemical Resistant Gloves — Nitrile, Neoprene and Butyl Material Nitrile / Neoprene / Butyl rubber / PVA Nitrile disposable Incidental contact, powder-free, 4–8 mil Neoprene Acids, bases, alcohols — good general chemical range Butyl Ketones, esters, DMSO — best for polar aprotic solvents PVA Aromatic and chlorinated solvents. Not water-compatible Sizes S, M, L, XL Standards
EN 374Typical applications
- Chemical handling
- Sample preparation
- Spill response
Full record, hazard data and enquiry for Chemical Resistant Gloves — Nitrile, Neoprene and Butyl →
Chemical Spill Kits — Acid, Alkali, Solvent and Mercury
Sized spill kits with neutralising absorbent, PPE, disposal bags and a written procedure card.
Ex-stockSpecification for Chemical Spill Kits — Acid, Alkali, Solvent and Mercury
Specification for Chemical Spill Kits — Acid, Alkali, Solvent and Mercury Acid kit Neutralising absorbent with colour-change indicator Alkali kit Citric-acid based neutraliser Solvent kit Inert polypropylene absorbent, non-sparking scoop Mercury kit Amalgamating powder, aspirator and indicator powder Sizes 5 L, 20 L and 50 L absorbent capacity Typical applications
- Spill response and containment
Full record, hazard data and enquiry for Chemical Spill Kits — Acid, Alkali, Solvent and Mercury →
Adapter Cone - Flexible Tubing
Adapter Cone - Flexible Tubing. Borosilicate glass 3.3. 5 sizes, 14 / 23 to 10 / 19.
Indent14 / 23 · 19 / 26 · 24 / 29 · 29 / 32 · 10 / 19
Specification for Adapter Cone - Flexible Tubing
Specification for Adapter Cone - Flexible Tubing Material Borosilicate glass 3.3 Sizes 14 / 23 · 19 / 26 · 24 / 29 · 29 / 32 · 10 / 19 14 / 23 5 per case · Cat. 8836A14 19 / 26 5 per case · Cat. 8836A19 24 / 29 5 per case · Cat. 8836A24 29 / 32 5 per case · Cat. 8836A29 10 / 19 5 per case · Cat. 8836B10 14 / 23 5 per case · Cat. 8836B14 19 / 26 5 per case · Cat. 8836B19 24 / 29 5 per case · Cat. 8836B24 29 / 32 5 per case · Cat. 8836B29 Also known as
- Cat. 8836
Full record, hazard data and enquiry for Adapter Cone - Flexible Tubing →
