Dry Bath Incubator with Stirring, Heating and Cooling
Programmable dry block incubator that heats and stirs tubes in the block, in a heat-only model and a model that also cools to 16 °C below room temperature.
Typical applications
- Sample incubation with mixing
- Enzyme and catalysis reactions
- Cold storage of reaction mixes during set-up
- Nucleic acid and protein sample preparation
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
The two models sit side by side in the catalogue and look identical. The difference is that only the cooling model goes below room temperature, to RT-16 °C, and it pays for that in top speed: 1500 rpm against 2000 rpm on the heat-only model. Decide which of the two you actually need before comparing quotations. All eight alternative blocks - 0.2 ml through 50 ml - are optional and quoted separately; what ships is the 35 x 2 ml block and an ABS protection cover, and only one block runs at a time. A block for the tube format you actually use is usually the missing line on the first quotation.Specification
| Operation, stirring model / cooling model | Stirring & Heating / Stirring, Heating & Cooling |
|---|---|
| Speed range, stirring model / cooling model | 200 to 2000 RPM / 200 to 1500 RPM |
| Heating temperature range | RT +5°C ~ 100°C (both models) |
| Cooling temperature range, stirring model / cooling model | NA / Room temperature -16°C |
| Cooling time, cooling model | 10~15 min |
| Heating time | 5 to 10 min |
| Module temperature stability | ≤ ± 0.3 °C |
| Display accuracy | 0.1 °C |
| Standard block | 35 holes x 2 ml |
| Programs | Multipoint cycle operation, 9 stage programmable, can run continuously at irregular intervals |
| Display | White LED display |
| Over temperature protection | Available |
| Ambient temperature | 5°C ~ 40°C |
| Optional blocks | 0.2 ml x 96 (6.7 mm), 0.5 ml x 54 (8 mm), 2 ml x 35 (10.8 mm), 12 ml x 24 (12 mm), 0.2 ml x 32 + 0.5 ml x 10 + 1.5 ml x 15 (6.1 / 8 / 10.8 mm), 5 ml x 24 (13.5 mm), 15 ml x 12 (16.9 mm), 50 ml x 6 (29.5 mm) |
| Power, stirring model / cooling model | 140 W / 180 W |
| Power supply | AC 220V / 50-60Hz |
| Packing dimension (L x W x H) | 330 x 280 x 280 mm / 330 x 280 x 310 mm |
| Gross weight, stirring model / cooling model | 9 kg / 11 kg |
| HSN code | 84198990 |
Support available
- Installation & commissioning
- Calibration
- Operator training
- Annual maintenance contract
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Vertical Autoclave, Fully Automatic
Triple-walled vertical steam steriliser with automatic cycle control, in standard and GMP specifications.
IndentISO 17665Operating condition: 121 °C at 15 psi (1.05 kg/cm²)
Specification for Vertical Autoclave, Fully Automatic
Specification for Vertical Autoclave, Fully Automatic Operating condition 121 °C at 15 psi (1.05 kg/cm²) Chamber volumes 35 L, 53 L, 78 L, 95 L, 119 L and 178 L Construction Stainless steel 304 chamber; 316 on GMP models Safety Spring-loaded safety valve, pressure switch, vacuum breaker Control PLC with HMI, cycle printout on GMP models Documentation IQ / OQ / PQ protocols available Site preparation Required — foundation or utilities Services Installation & commissioning · Calibration · Validation & qualification · Operator training · Annual maintenance contract · Spares & consumables Standards
ISO 17665Typical applications
- Sterilisation of culture media and glassware
- Decontamination of biological waste
- Pharmaceutical and hospital sterilisation
Full record, hazard data and enquiry for Vertical Autoclave, Fully Automatic →
Laminar Air Flow Cabinet, Horizontal / Vertical
HEPA-filtered clean work station providing an ISO Class 5 work zone for aseptic handling.
IndentISO 14644-1Filtration: HEPA, 99.97% efficient at 0.3 µm
Specification for Laminar Air Flow Cabinet, Horizontal / Vertical
Specification for Laminar Air Flow Cabinet, Horizontal / Vertical Filtration HEPA, 99.97% efficient at 0.3 µm Pre-filter Washable synthetic, 5 µm Air velocity 0.45 ± 0.1 m/s at the work surface Work zone class ISO Class 5 Sizes 2 ft, 3 ft, 4 ft and 6 ft Fitted with UV germicidal lamp, fluorescent lamp, manometer Services Installation & commissioning · Validation & qualification · Operator training · Annual maintenance contract · Spares & consumables Standards
ISO 14644-1Typical applications
- Aseptic media pouring and plating
- Plant tissue culture
- Sterile sample preparation
Full record, hazard data and enquiry for Laminar Air Flow Cabinet, Horizontal / Vertical →
BOD Incubator, Digital
Refrigerated incubator with precise low-temperature control for biochemical oxygen demand and general culture work.
Ex-stockIS 3025 (Part 44)Temperature range: 5 °C to 50 °C
Specification for BOD Incubator, Digital
Specification for BOD Incubator, Digital Temperature range 5 °C to 50 °C Accuracy ± 0.5 °C Chamber volumes 110 L, 170 L, 216 L and 336 L Construction Stainless steel inner, PUF insulated Control Digital PID with safety thermostat Options Data logger, chart recorder, GMP dual chamber Services Installation & commissioning · Calibration · Validation & qualification · Annual maintenance contract · Spares & consumables Standards
IS 3025 (Part 44)Typical applications
- BOD₅ determination at 20 °C
- Bacteriological culture at controlled temperature
- Seed and germination studies
Full record, hazard data and enquiry for BOD Incubator, Digital →
Orbital Shaking Incubator
Cabinet orbital shaker with heating and forced air circulation, offered in tray layouts from six 5-litre flasks to twenty-five 250 ml flasks, under PLC and touch-screen control.
IndentControl system: PLC with HMI touch screen
Specification for Orbital Shaking Incubator
Specification for Orbital Shaking Incubator Control system PLC with HMI touch screen Temperature control High precision, with forced air circulation for uniformity Interior Stainless steel 304 Illumination LED lighting, dimmable Timer Automatic 24-hour cyclic timer PC software Compatible with 21 CFR Part 11 compliance PC software Flask capacity 5000 ml 6 flasks Flask capacity 2000 ml 16 flasks Flask capacity 1000 ml 9 or 4 flasks Flask capacity 500 ml 25 or 16 flasks Flask capacity 250 ml 25, 16 or 9 flasks Services Validation & qualification Typical applications
- Shaken flask culture in conical flasks
- Temperature-controlled incubation with continuous agitation
Full record, hazard data and enquiry for Orbital Shaking Incubator →
