Indent

Ice Flaker, Touchscreen, 200 kg per 24 h, Detachable Bin

Floor-standing flake ice machine rated at 200 kg a day over a detachable 60 kg bin, for departments that draw ice by the bucket rather than by the scoop.

Typical applications

Bulk ice supply for sample transport and storage
Packing specimens and tissue in ice
Ice baths for extraction and homogenisation
Hospital, research institute and biotechnology laboratory supply

Add to enquiry

Configuration

Quantity

Enquire on WhatsApp

Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.

Worth knowing before you order

This is the bulk machine in the range: 200 kg a day over a 60 kg bin, sized for a department rather than a bench. The bin detaches, which matters more than it sounds - it is how the machine is cleaned and how it gets through a doorway, and the two parts are shipped and weighed separately at 66 kg and 35 kg. It is a plumbed installation: 25 mm water supply, drainage tube, a water filter in the standard kit, and front and back ventilation clearance with ambient below 25 °C. Flake ice packs around samples and cools by contact, which cube ice does not. One gap to close before siting - the table prints input power (850 W) but no mains voltage or frequency for this model, so confirm the electrical supply in writing. Refrigerant is R290A, which is flammable.

Specification

Technical specification for Ice Flaker, Touchscreen, 200 kg per 24 h, Detachable Bin
Capacity	200 kg per 24 hours
Storage capacity	60 kg
Ice type	Flake ice, continuous output
Storage bin	ABS, detachable
Cooling method	Compressor cooling with fan cooling, front and back ventilation
Ambient temperature	Below 25°C for optimum working
Water temperature (recommended)	20°C
Water supply size	25 mm
Construction material	Stainless steel
Noise level	58 db
Refrigerant	R290A, CFC free compressor
Display and control	Touch screen, fully automatic microprocessor control, timer function
Auto off	Yes
Low water level indication	Yes
Input power	850 W
Packing dimension (L x W x H)	755 x 655 x 640 mm
Gross weight (main instrument + storage bin)	66 kg + 35 kg
Supplied with	Water filter with inlet and outlet tube, inlet tube, drainage tube, ice shovel (scoop), leg, instruction manual, test certificate

Site preparation required

This instrument needs site work before delivery — typically a level grouted foundation, a dedicated power supply, and in some cases drainage or extraction. We issue the foundation drawing and utility schedule with the quotation so the civil work runs in parallel with the lead time.

Support available

Installation & commissioning
Operator training
Annual maintenance contract
Spares & consumables

Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.

Related products

Ultra-Low Temperature Deep Freezer, −40 °C to −80 °C

Upright ultra-low temperature freezer holding −40 °C to −80 °C on a cascade refrigeration system, with touch-screen control, alarms and Ethernet or PC connectivity for continuous temperature records.

Indent

Temperature range: −40 °C to −80 °C

Specification

Specification for Ultra-Low Temperature Deep Freezer, −40 °C to −80 °C
Temperature range	−40 °C to −80 °C
Refrigeration	Cascade refrigeration system
Refrigerant	CFC free
Control and display	Touch screen
Alarm	Fitted, with e-mail alert
Connectivity	Ethernet communication and PC connectivity
Safety provisions	Over-temperature cut-off; electrical overload cut-off; time delay for compressor switch-on
Qualification documents	IQ / OQ / PQ documents available
Services	Validation & qualification

Typical applications

Ultra-low temperature storage of laboratory samples
Storage of biological material and reagents below −40 °C

Full record, hazard data and enquiry for Ultra-Low Temperature Deep Freezer, −40 °C to −80 °C →

Twin-Chamber Laboratory Refrigerator and Deep Freezer

One cabinet carrying two independently controlled chambers, a 2 °C to 8 °C laboratory refrigerator and a 0 °C to −25 °C deep freezer, each with its own display and alarm.

Indent

Refrigerator chamber: 2 °C to 8 °C

Specification

Specification for Twin-Chamber Laboratory Refrigerator and Deep Freezer
Refrigerator chamber	2 °C to 8 °C
Deep freezer chamber	0 °C to −25 °C
Refrigeration	Cascade refrigeration system
Refrigerant	CFC free
Control and display	Touch screen, with a display on each chamber
Alarm	Fitted, with e-mail alert
Connectivity	Ethernet communication and PC connectivity
Safety provisions	Over-temperature cut-off; electrical overload cut-off; time delay for compressor switch-on
Qualification documents	IQ / OQ / PQ documents available
Services	Validation & qualification

Typical applications

Cold storage of reagents and samples at 2-8 °C
Frozen storage down to −25 °C
Laboratories needing both duties in one footprint

Full record, hazard data and enquiry for Twin-Chamber Laboratory Refrigerator and Deep Freezer →

Refrigerated Circulating Bath, 10 L, Touchscreen

Refrigerated and heated circulating bath with internal and external pump circuits, for holding an instrument or a reaction at a set temperature between -30 °C and 100 °C.

Indent

Temperature range, -10 / -20 / -30 model: -10°C to 100°C / -20°C to 100°C / -30°C to 100°C

Specification

Specification for Refrigerated Circulating Bath, 10 L, Touchscreen
Temperature range, -10 / -20 / -30 model	-10°C to 100°C / -20°C to 100°C / -30°C to 100°C
Temperature display resolution	0.01°C
Temperature accuracy	±0.05°C
Temperature control	Microprocessor PID, programmable controller
Temperature sensor	PT100
Display	Touchscreen
Refrigeration	Air cooled refrigeration through compressor
Refrigerant	R-134A
Pump circulation	Internal and external
Pump flow rate	8 L/min
Bath tank capacity	10 L
Tank size (L x W x D)	270 x 200 x 200 mm

9 further specifications on the full record.

Typical applications

Jacketing a rotary evaporator or glass reactor
Temperature control of spectrophotometer and polarimeter cells
Viscometer and refractometer sample conditioning
Fermentation tank and chromatographic column temperature control
Electrophoresis cooling

Also known as

Refrigerated circulator
Chiller bath
Low temperature circulating bath
Heating and cooling circulator
Thermostatic bath

Full record, hazard data and enquiry for Refrigerated Circulating Bath, 10 L, Touchscreen →

Refrigerated Circulating Bath, 6 L, Horizontal, for Viscometer

Horizontal refrigerated circulating bath with a flat stainless top and a 110 mm circular opening, built so a rotational viscometer stand can work over the bath while the sample is held at temperature.

Indent

Shape: Horizontal (specialised for viscometer)

Specification

Specification for Refrigerated Circulating Bath, 6 L, Horizontal, for Viscometer
Shape	Horizontal (specialised for viscometer)
Temperature range	-20°C to 100°C
Temperature display resolution	0.01°C
Temperature accuracy	± 0.05°C
Temperature control	Microprocessor PID, programmable controller
Temperature sensor	PT100
Display	Touchscreen
Refrigeration	Air cooled refrigeration through compressor
Refrigerant	R-134A
Pump circulation	Internal and external
Pump flow rate	6 L/min
Bath tank capacity	6 L

9 further specifications on the full record.

Typical applications

Sample conditioning under a rotational viscometer
Spectrophotometer and polarimeter cell temperature control
Refractometer sample conditioning
Fermentation tank and chromatographic column temperature control

Also known as

Viscometer bath
Horizontal refrigerated circulator
Low temperature bath for viscometer
Refrigerated circulator, flat top

Full record, hazard data and enquiry for Refrigerated Circulating Bath, 6 L, Horizontal, for Viscometer →