Infrared Sterilizer (Loop Sterilizer / Bacti-Cinerator)
Bench-top infrared sterilizer that brings a small ceramic well to red heat so inoculation loops, needles and forceps can be decontaminated in seconds inside a safety cabinet.
Typical applications
- Sterilising inoculation loops and needles
- Flame-free working inside a biosafety cabinet
- Decontaminating forceps and small instrument tips
- Routine microbiological subculturing
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
This is a bench decontaminator for small metal tools, not an autoclave. It cannot process media, liquids, wrapped instruments, plastics or waste, and it produces no cycle record - anything that has to be documented as sterile still goes through steam. What it does replace is the spirit lamp, and that is a real gain inside a biosafety cabinet, where an open flame disturbs the laminar airflow and is a fire risk near alcohol. Choose by tool geometry rather than by power: the Ø14 well is narrow but deep, with a 150 mm heating zone for loops and needles, while the Ø35 well is wide and shallower, with a 100 mm zone for forceps and larger tips. One inconsistency to check with the supplier - the table gives maximum temperature as 825 °C ± 50 °C on one row and the heating modes as 400 °C and 850 °C on the next. The well stays dangerously hot after switch-off and there is no cool-down interlock.Specification
| Maximum diameter of sterilizing well, small / large model | Ø14 / Ø35 |
|---|---|
| Length of heating zone, small / large model | 150 mm / 100 mm |
| Maximum temperature | 825°C ± 50°C |
| Heating temperature mode | Two, 400°C and 850°C |
| Heating modes | 2 |
| Sterilisation time | 5-7 seconds |
| Warm-up time | 10-20 min |
| Ambient temperature | 5°C to 40°C |
| Power, small / large model | 150 W / 280 W |
| Power supply | AC220V / 50Hz |
| Packing dimension (L x W x H) | 265 x 210 x 160 mm / 270 x 220 x 165 mm |
| Gross weight | 1 kg (both models) |
| HSN code | 84192090 |
Support available
- Installation & commissioning
- Operator training
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Vertical Autoclave, Fully Automatic
Triple-walled vertical steam steriliser with automatic cycle control, in standard and GMP specifications.
IndentISO 17665Operating condition: 121 °C at 15 psi (1.05 kg/cm²)
Specification for Vertical Autoclave, Fully Automatic
Specification for Vertical Autoclave, Fully Automatic Operating condition 121 °C at 15 psi (1.05 kg/cm²) Chamber volumes 35 L, 53 L, 78 L, 95 L, 119 L and 178 L Construction Stainless steel 304 chamber; 316 on GMP models Safety Spring-loaded safety valve, pressure switch, vacuum breaker Control PLC with HMI, cycle printout on GMP models Documentation IQ / OQ / PQ protocols available Site preparation Required — foundation or utilities Services Installation & commissioning · Calibration · Validation & qualification · Operator training · Annual maintenance contract · Spares & consumables Standards
ISO 17665Typical applications
- Sterilisation of culture media and glassware
- Decontamination of biological waste
- Pharmaceutical and hospital sterilisation
Full record, hazard data and enquiry for Vertical Autoclave, Fully Automatic →
Laminar Air Flow Cabinet, Horizontal / Vertical
HEPA-filtered clean work station providing an ISO Class 5 work zone for aseptic handling.
IndentISO 14644-1Filtration: HEPA, 99.97% efficient at 0.3 µm
Specification for Laminar Air Flow Cabinet, Horizontal / Vertical
Specification for Laminar Air Flow Cabinet, Horizontal / Vertical Filtration HEPA, 99.97% efficient at 0.3 µm Pre-filter Washable synthetic, 5 µm Air velocity 0.45 ± 0.1 m/s at the work surface Work zone class ISO Class 5 Sizes 2 ft, 3 ft, 4 ft and 6 ft Fitted with UV germicidal lamp, fluorescent lamp, manometer Services Installation & commissioning · Validation & qualification · Operator training · Annual maintenance contract · Spares & consumables Standards
ISO 14644-1Typical applications
- Aseptic media pouring and plating
- Plant tissue culture
- Sterile sample preparation
Full record, hazard data and enquiry for Laminar Air Flow Cabinet, Horizontal / Vertical →
BOD Incubator, Digital
Refrigerated incubator with precise low-temperature control for biochemical oxygen demand and general culture work.
Ex-stockIS 3025 (Part 44)Temperature range: 5 °C to 50 °C
Specification for BOD Incubator, Digital
Specification for BOD Incubator, Digital Temperature range 5 °C to 50 °C Accuracy ± 0.5 °C Chamber volumes 110 L, 170 L, 216 L and 336 L Construction Stainless steel inner, PUF insulated Control Digital PID with safety thermostat Options Data logger, chart recorder, GMP dual chamber Services Installation & commissioning · Calibration · Validation & qualification · Annual maintenance contract · Spares & consumables Standards
IS 3025 (Part 44)Typical applications
- BOD₅ determination at 20 °C
- Bacteriological culture at controlled temperature
- Seed and germination studies
Full record, hazard data and enquiry for BOD Incubator, Digital →
Orbital Shaking Incubator
Cabinet orbital shaker with heating and forced air circulation, offered in tray layouts from six 5-litre flasks to twenty-five 250 ml flasks, under PLC and touch-screen control.
IndentControl system: PLC with HMI touch screen
Specification for Orbital Shaking Incubator
Specification for Orbital Shaking Incubator Control system PLC with HMI touch screen Temperature control High precision, with forced air circulation for uniformity Interior Stainless steel 304 Illumination LED lighting, dimmable Timer Automatic 24-hour cyclic timer PC software Compatible with 21 CFR Part 11 compliance PC software Flask capacity 5000 ml 6 flasks Flask capacity 2000 ml 16 flasks Flask capacity 1000 ml 9 or 4 flasks Flask capacity 500 ml 25 or 16 flasks Flask capacity 250 ml 25, 16 or 9 flasks Services Validation & qualification Typical applications
- Shaken flask culture in conical flasks
- Temperature-controlled incubation with continuous agitation
Full record, hazard data and enquiry for Orbital Shaking Incubator →