Indent

Recirculating Water Chiller, 3.5 L

Compact recirculating chiller that pumps temperature-controlled coolant to a condenser or jacket, replacing a running tap on a rotary evaporator or glass reactor.

Typical applications

  • Cooling a rotary evaporator condenser
  • Glass reactor jacket cooling
  • Viscometer and rheometer temperature control
  • Abbe refractometer and electrophoresis cooling
  • Cooling an ultrasonic homogeniser

Add to enquiry

Enquire on WhatsApp

Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.

Worth knowing before you order

The figure that decides whether this chiller can do your job is not in the table. Cooling capacity in watts at a stated temperature is what tells you if it will hold a rotary evaporator condenser at 5 °C while the bath below is at 60 °C, and it is not printed; the 1200 W row is input power, which is a different quantity. Two further limits are easy to miss: ambient must be 10-25 °C, so performance falls away in a hot room, and pump lift is 2 m, which caps how far above the chiller the condenser can sit. The reservoir is only 3.5 L, so it warms quickly under load. Two thermal sleeves and a 30 cm drain pipe are supplied; hose to the instrument, and the coolant itself if you intend to run below 5 °C, are not.

Specification

Technical specification for Recirculating Water Chiller, 3.5 L
Bath capacity3.5 L
Temperature control range-20°C to 100°C
Temperature resolution0.01°C
Temperature constancy0.1°C
Temperature control systemPID
Pump flow8 L/min
Pump lift2 m
Inner materialSS304
Circulation and drainage portSS304 connectors, built-in drain valve, automatic overflow drain
Display4.3" TFT touch screen
Water filling hole35 mm
Ambient temperature10°C~25°C
Total power1200 W
Power supply220V/50Hz
Inner size (L x W x H)180 x 170 x 130 mm
Instrument dimension (L x W x H)440 x 300 x 510 mm
Packing dimension (L x W x H)520 x 370 x 600 mm
Gross weight30 kg
HSN code84189100

Support available

  • Installation & commissioning
  • Calibration
  • Operator training
  • Annual maintenance contract
  • Spares & consumables

Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.

Related products