Slump Test Apparatus
Slump cone, base plate and tamping rod for measuring the workability of fresh concrete.
Typical applications
- Workability of fresh concrete at batching plant and site
Conforms to
- IS 1199 (Part 2) : 2018—Fresh Concrete — Methods of Sampling, Testing and Analysis: Determination of Consistency
- IS 7320—Concrete slump test apparatus — Specification
- ASTM C143—Slump of Hydraulic-Cement Concrete
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Specification
| Cone dimensions | 200 mm bottom ø × 100 mm top ø × 300 mm high |
|---|---|
| Cone material | Metal, minimum 1.6 mm (16 SWG) thickness |
| Tamping rod | 16 mm ø × 600 mm, hemispherical tip |
| Base plate | Machined steel with foot rests |
Support available
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Compression Testing Machine, 2000 kN, Digital
Digital compression testing machine with controlled pace rate for concrete cubes, cylinders and cement mortar specimens.
IndentIS 14858Capacity: 2000 kN (also 500, 1000, 1500 and 3000 kN)
Specification for Compression Testing Machine, 2000 kN, Digital
Specification for Compression Testing Machine, 2000 kN, Digital Capacity 2000 kN (also 500, 1000, 1500 and 3000 kN) Pace rate 1–20 kN/s, displayed and controlled Readout Direct load in kN and stress in N/mm² Accuracy class Grade A, ±1% of indicated load Frame Four-column welded steel Platens Hardened, ground and lapped Power 415 V, 3-phase, 50 Hz Site preparation Required — foundation or utilities Services Installation & commissioning · Calibration · Operator training · Annual maintenance contract · Spares & consumables Standards
IS 14858IS 516 (Part 1/Sec 1) : 2021Typical applications
- Compressive strength of concrete cubes and cylinders
- Compressive strength of cement mortar
- Compressive strength of masonry units
Full record, hazard data and enquiry for Compression Testing Machine, 2000 kN, Digital →
Vicat Needle Apparatus
Determines standard consistency and initial and final setting time of cement paste.
Ex-stockIS 5513Plunger: 10 ± 0.05 mm ø × 50 ± 1 mm long
Specification for Vicat Needle Apparatus
Specification for Vicat Needle Apparatus Plunger 10 ± 0.05 mm ø × 50 ± 1 mm long Initial setting needle 1.13 mm ø (1 mm²) square section Final setting needle Annular attachment, 5 mm from tip Moving assembly mass 300 ± 1 g Scale 0–50 mm graduated, 1 mm divisions Rod clearance 0.25 mm, with dashpot damping Services Calibration · Spares & consumables Standards
IS 5513IS 4031 (Part 4)IS 4031 (Part 5)EN 196-3Typical applications
- Standard consistency of cement
- Initial and final setting time of cement and cement blends
Full record, hazard data and enquiry for Vicat Needle Apparatus →
Le Chatelier Mould, Set of Six
Split brass cylinders with indicator arms for determining the soundness of cement by expansion.
Ex-stockIS 4031 (Part 3)Cylinder: 30 mm internal ø × 30 mm high, 0.5 mm wall
Specification for Le Chatelier Mould, Set of Six
Specification for Le Chatelier Mould, Set of Six Cylinder 30 mm internal ø × 30 mm high, 0.5 mm wall Indicator arms 165 mm long from centre of cylinder Material Brass Supplied with Glass plates and 100 g lead weights Services Spares & consumables Standards
IS 4031 (Part 3)IS 5514EN 196-3Typical applications
- Soundness of cement by Le Chatelier expansion
Full record, hazard data and enquiry for Le Chatelier Mould, Set of Six →
Blaine Air Permeability Apparatus
Determines the fineness of cement and pozzolana as specific surface area by air permeability.
IndentIS 4031 (Part 2)Permeability cell: Brass, with perforated disc and plunger
Specification for Blaine Air Permeability Apparatus
Specification for Blaine Air Permeability Apparatus Permeability cell Brass, with perforated disc and plunger Manometer U-tube with four etched marks Result Specific surface in cm²/g or m²/kg Reference material Requires standard cement for cell calibration Services Calibration · Spares & consumables Standards
IS 4031 (Part 2)IS 5516ASTM C204EN 196-6Typical applications
- Fineness of OPC, PPC, PSC, fly ash and GGBS
Full record, hazard data and enquiry for Blaine Air Permeability Apparatus →
