Stackable Incubator Shaker, 150 L, with or without CO2 Control
Floor-standing 150 L orbital incubator shaker for flask culture, stackable up to three separately controlled layers, offered as a heated unit and as a refrigerated unit with CO2 control.
Typical applications
- Bacterial and yeast culture in flasks
- Fermentation
- Hybridisation
- Enzyme and tissue studies
- Cell culture needing CO2 (CO2 model)
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
Read the temperature rows before the function row. The catalogue labels the heated model "Heating & Cooling", but in the same table its refrigerant is NA and its range starts at RT+5°C, so it cannot hold anything below room temperature; only the CO2 model carries R134A and is quoted at 4~65°C, and even that is qualified "at 25°C" ambient. Treat them as two different machines, not as an option. The other decisive figure is the orbit: 50 mm is a long throw, good for aeration of large flasks but capable of splashing a full flask, and it is not comparable with the 25-26 mm orbit of a benchtop shaker at the same rpm. The table prints no CO2 concentration range and no humidity figure although the feature list claims CO2 control and a humidity display, so both are missing here and should be confirmed in writing. Standard supply is the instrument, manual and test certificate only: clamps for flask sizes other than those listed, and any gas regulator or CO2 cylinder, are separate.Specification
| Function, heated model / CO2 model | Heating & Cooling / CO2, Heating & Cooling (as printed) |
|---|---|
| Temperature range, heated model | RT+5 ~ 65°C |
| Temperature range, CO2 model | 4~65°C (at 25°C) |
| Refrigerant, heated model / CO2 model | NA / R134A |
| Temperature uniformity | ±0.5°C (at 37°C) |
| Shaking speed | 30~300 rpm |
| Orbit (shaking plate oscillation amplitude) | 50 mm, horizontal rotation |
| Working space volume | 150 L |
| Shaking plate size (L x W) | 700 x 460 mm |
| Maximum load capacity | 20 kg |
| Flask capacity under spring clamp | 250 ml x 42, 500 ml x 23, 1 lt x 12, 2 lt x 9 |
| Inside material | SS304 stainless steel, mirror finish, rounded edges |
| Timing range | 0-999 hrs/min |
| Control and display | PID, touch screen, fixed value or multi-stage mode |
| UV sterilisation function | Available |
| Stacking | Single, double or three layers, each layer controlled separately, shared drainage outlet |
| Power, heated model / CO2 model | 1500 W / 1600 W |
| Power supply | AC 220V / 50-60Hz |
| Gross weight, heated model / CO2 model | 170 kg / 185 kg |
| HSN code | 84198990 |
Support available
- Installation & commissioning
- Calibration
- Operator training
- Annual maintenance contract
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Vertical Autoclave, Fully Automatic
Triple-walled vertical steam steriliser with automatic cycle control, in standard and GMP specifications.
IndentISO 17665Operating condition: 121 °C at 15 psi (1.05 kg/cm²)
Specification for Vertical Autoclave, Fully Automatic
Specification for Vertical Autoclave, Fully Automatic Operating condition 121 °C at 15 psi (1.05 kg/cm²) Chamber volumes 35 L, 53 L, 78 L, 95 L, 119 L and 178 L Construction Stainless steel 304 chamber; 316 on GMP models Safety Spring-loaded safety valve, pressure switch, vacuum breaker Control PLC with HMI, cycle printout on GMP models Documentation IQ / OQ / PQ protocols available Site preparation Required — foundation or utilities Services Installation & commissioning · Calibration · Validation & qualification · Operator training · Annual maintenance contract · Spares & consumables Standards
ISO 17665Typical applications
- Sterilisation of culture media and glassware
- Decontamination of biological waste
- Pharmaceutical and hospital sterilisation
Full record, hazard data and enquiry for Vertical Autoclave, Fully Automatic →
Laminar Air Flow Cabinet, Horizontal / Vertical
HEPA-filtered clean work station providing an ISO Class 5 work zone for aseptic handling.
IndentISO 14644-1Filtration: HEPA, 99.97% efficient at 0.3 µm
Specification for Laminar Air Flow Cabinet, Horizontal / Vertical
Specification for Laminar Air Flow Cabinet, Horizontal / Vertical Filtration HEPA, 99.97% efficient at 0.3 µm Pre-filter Washable synthetic, 5 µm Air velocity 0.45 ± 0.1 m/s at the work surface Work zone class ISO Class 5 Sizes 2 ft, 3 ft, 4 ft and 6 ft Fitted with UV germicidal lamp, fluorescent lamp, manometer Services Installation & commissioning · Validation & qualification · Operator training · Annual maintenance contract · Spares & consumables Standards
ISO 14644-1Typical applications
- Aseptic media pouring and plating
- Plant tissue culture
- Sterile sample preparation
Full record, hazard data and enquiry for Laminar Air Flow Cabinet, Horizontal / Vertical →
BOD Incubator, Digital
Refrigerated incubator with precise low-temperature control for biochemical oxygen demand and general culture work.
Ex-stockIS 3025 (Part 44)Temperature range: 5 °C to 50 °C
Specification for BOD Incubator, Digital
Specification for BOD Incubator, Digital Temperature range 5 °C to 50 °C Accuracy ± 0.5 °C Chamber volumes 110 L, 170 L, 216 L and 336 L Construction Stainless steel inner, PUF insulated Control Digital PID with safety thermostat Options Data logger, chart recorder, GMP dual chamber Services Installation & commissioning · Calibration · Validation & qualification · Annual maintenance contract · Spares & consumables Standards
IS 3025 (Part 44)Typical applications
- BOD₅ determination at 20 °C
- Bacteriological culture at controlled temperature
- Seed and germination studies
Full record, hazard data and enquiry for BOD Incubator, Digital →
Orbital Shaking Incubator
Cabinet orbital shaker with heating and forced air circulation, offered in tray layouts from six 5-litre flasks to twenty-five 250 ml flasks, under PLC and touch-screen control.
IndentControl system: PLC with HMI touch screen
Specification for Orbital Shaking Incubator
Specification for Orbital Shaking Incubator Control system PLC with HMI touch screen Temperature control High precision, with forced air circulation for uniformity Interior Stainless steel 304 Illumination LED lighting, dimmable Timer Automatic 24-hour cyclic timer PC software Compatible with 21 CFR Part 11 compliance PC software Flask capacity 5000 ml 6 flasks Flask capacity 2000 ml 16 flasks Flask capacity 1000 ml 9 or 4 flasks Flask capacity 500 ml 25 or 16 flasks Flask capacity 250 ml 25, 16 or 9 flasks Services Validation & qualification Typical applications
- Shaken flask culture in conical flasks
- Temperature-controlled incubation with continuous agitation
Full record, hazard data and enquiry for Orbital Shaking Incubator →
