Concrete Cube and Beam Moulds
Cast iron and steel moulds for casting standard concrete test specimens.
Typical applications
- Casting concrete specimens for compressive and flexural testing
Conforms to
- IS 10086 : 2021—Moulds for use in tests of cement and concrete
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Specification
| Cube sizes | 150 mm and 100 mm |
|---|---|
| Beam sizes | 100 × 100 × 500 mm and 150 × 150 × 700 mm |
| Cylinder sizes | 150 mm ø × 300 mm |
| Material | Cast iron or steel, machined faces |
Support available
- Calibration
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Compression Testing Machine, 2000 kN, Digital
Digital compression testing machine with controlled pace rate for concrete cubes, cylinders and cement mortar specimens.
IndentIS 14858Capacity: 2000 kN (also 500, 1000, 1500 and 3000 kN)
Specification for Compression Testing Machine, 2000 kN, Digital
Specification for Compression Testing Machine, 2000 kN, Digital Capacity 2000 kN (also 500, 1000, 1500 and 3000 kN) Pace rate 1–20 kN/s, displayed and controlled Readout Direct load in kN and stress in N/mm² Accuracy class Grade A, ±1% of indicated load Frame Four-column welded steel Platens Hardened, ground and lapped Power 415 V, 3-phase, 50 Hz Site preparation Required — foundation or utilities Services Installation & commissioning · Calibration · Operator training · Annual maintenance contract · Spares & consumables Standards
IS 14858IS 516 (Part 1/Sec 1) : 2021Typical applications
- Compressive strength of concrete cubes and cylinders
- Compressive strength of cement mortar
- Compressive strength of masonry units
Full record, hazard data and enquiry for Compression Testing Machine, 2000 kN, Digital →
Slump Test Apparatus
Slump cone, base plate and tamping rod for measuring the workability of fresh concrete.
Ex-stockIS 1199 (Part 2) : 2018Cone dimensions: 200 mm bottom ø × 100 mm top ø × 300 mm high
Specification for Slump Test Apparatus
Specification for Slump Test Apparatus Cone dimensions 200 mm bottom ø × 100 mm top ø × 300 mm high Cone material Metal, minimum 1.6 mm (16 SWG) thickness Tamping rod 16 mm ø × 600 mm, hemispherical tip Base plate Machined steel with foot rests Services Spares & consumables Standards
IS 1199 (Part 2) : 2018IS 7320ASTM C143Typical applications
- Workability of fresh concrete at batching plant and site
Full record, hazard data and enquiry for Slump Test Apparatus →
Vicat Needle Apparatus
Determines standard consistency and initial and final setting time of cement paste.
Ex-stockIS 5513Plunger: 10 ± 0.05 mm ø × 50 ± 1 mm long
Specification for Vicat Needle Apparatus
Specification for Vicat Needle Apparatus Plunger 10 ± 0.05 mm ø × 50 ± 1 mm long Initial setting needle 1.13 mm ø (1 mm²) square section Final setting needle Annular attachment, 5 mm from tip Moving assembly mass 300 ± 1 g Scale 0–50 mm graduated, 1 mm divisions Rod clearance 0.25 mm, with dashpot damping Services Calibration · Spares & consumables Standards
IS 5513IS 4031 (Part 4)IS 4031 (Part 5)EN 196-3Typical applications
- Standard consistency of cement
- Initial and final setting time of cement and cement blends
Full record, hazard data and enquiry for Vicat Needle Apparatus →
Le Chatelier Mould, Set of Six
Split brass cylinders with indicator arms for determining the soundness of cement by expansion.
Ex-stockIS 4031 (Part 3)Cylinder: 30 mm internal ø × 30 mm high, 0.5 mm wall
Specification for Le Chatelier Mould, Set of Six
Specification for Le Chatelier Mould, Set of Six Cylinder 30 mm internal ø × 30 mm high, 0.5 mm wall Indicator arms 165 mm long from centre of cylinder Material Brass Supplied with Glass plates and 100 g lead weights Services Spares & consumables Standards
IS 4031 (Part 3)IS 5514EN 196-3Typical applications
- Soundness of cement by Le Chatelier expansion
Full record, hazard data and enquiry for Le Chatelier Mould, Set of Six →
