Indent

Humidity Chamber

Floor-standing double-walled chamber that holds a set temperature and relative humidity with PID control, used by pharmaceutical, chemical and electronics laboratories for controlled-environment storage and testing.

Typical applications

Drug and drug substance testing
Plant and vegetable testing
Electronic chips and components testing
Paint, cement and chemical testing

Add to enquiry

Configuration

Quantity

Enquire on WhatsApp

Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.

Worth knowing before you order

The manufacturer’s table prints 3124.00 L for the 60 × 60 × 90 cm working chamber. The geometry gives 324 L, and the same manufacturer prints 324.00 L for that size elsewhere — treat 3124 as a typographic error and confirm the volume on the quotation. The manufacturer also prints ISO 9001:2008 (certificate, not a test method). Those are not test methods for this instrument, so they are not listed as conformity above — ask us for the certificate itself if you need it.

Specification

Technical specification for Humidity Chamber
Temperature measurement	By PID controller
RH measurement	By capacitance type RH sensor
Temperature range	10 °C to 70 °C
Temperature accuracy	± 0.1 °C
Humidity range	40 % RH to 95 % RH
Humidity accuracy	± 3 % RH
Construction	Double wall construction
Interior material	High grade stainless steel (S.S. 304 / S.S. 316)
Exterior material	Mild steel or stainless steel (S.S. 304 / S.S. 316)
Humidity system	Non-condensing steam injection type, with water level circuit
Heating	Long lasting SS tubular heaters
Refrigeration	Hermetically sealed compressor, CFC free refrigerant (134 A gas), evaporation coil and condenser
Mobility	Castor wheels for easy movement
Safety features	High temperature safety cut off; low water level boiler cut off; electrical overload cut off; time delay for compressor switch ON; electrical circuit breaker
Data logging (optional)	4 / 8 / 16 channel data logger with temperature and RH sensors
Compliance software (optional)	21 CFR compliance software with PC communication
Door access (optional)	Password protected door access and monitoring
Remote alert (optional)	GSM alert through SIM card
Validation (optional)	Onsite validation for 24 hours on empty, half and full load conditions
Certification	CE certified
Working chamber 45 x 45 x 45 cm	Overall 66 x 74 x 119 cm; capacity 92.00 litres; 2 trays; net weight 115.00 kg; shipping weight 190.00 kg
Working chamber 50 x 50 x 70 cm	Overall 71 x 76 x 145 cm; capacity 175.00 litres; 2 trays; net weight 135.00 kg; shipping weight 205.00 kg
Working chamber 60 x 60 x 60 cm	Overall 81 x 84 x 135 cm; capacity 216.00 litres; 3 trays; net weight 150.00 kg; shipping weight 225.00 kg
Working chamber 60 x 60 x 90 cm	Overall 81 x 84 x 165 cm; capacity printed as 3124.00 litres (apparent typographic error - 324.00 litres is printed for the same working chamber elsewhere in the range); 3 trays; net weight 157.00 kg; shipping weight 232.00 kg

Support available

Validation & qualification (IQ/OQ/PQ)

Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.

Related products

Stability Chamber

Touch-screen PLC controlled temperature and humidity chamber that holds ICH storage conditions such as 25 °C/60 % RH and 40 °C/75 % RH, used by pharmaceutical QC and R&D laboratories for long-term and accelerated stability studies. Also printed as Humidity Chamber.

Indent

Storage conditions fulfilled: 25 °C / 60 % RH; 30 °C / 65 % RH; 30 °C / 70 % RH; 30 °C / 75 % RH; 40 °C / 75 % RH; 25 °C / 40 % RH; 30 °C / 35 % RH; 40 °C / NMT 25 % RH

Specification

Specification for Stability Chamber
Storage conditions fulfilled	25 °C / 60 % RH; 30 °C / 65 % RH; 30 °C / 70 % RH; 30 °C / 75 % RH; 40 °C / 75 % RH; 25 °C / 40 % RH; 30 °C / 35 % RH; 40 °C / NMT 25 % RH
Temperature accuracy	± 0.1 °C
Temperature resolution	0.1 °C
Humidity range	40 % RH to 95 % RH
Humidity fluctuation	Maximum 3 % RH
Humidity sensor	Capacitance type, enables direct display of RH and temperature
Chamber illumination	2 or 4 LED lights for lesser power consumption; LED light with door switch
Compressor rating	1.5 KW
Dry heater rating	2.0 KW
Wet heater rating	3.0 KW
Overall power consumption (three phase)	2.5 KW per phase (for 3-phase connection)
Power consumption (single phase)	7.0 KW (for single phase connection)

13 further specifications on the full record.

Typical applications

ICH long-term stability storage
Accelerated stability studies
Pharmaceutical shelf-life determination
Drug and drug substance testing

Full record, hazard data and enquiry for Stability Chamber →

Walk-In Stability Chamber

Prefabricated modular walk-in room, 4,000 to 80,000 litres, that holds ICH temperature and humidity storage conditions for bulk pharmaceutical stability and retention samples under PLC touch-screen control.

Indent

Storage conditions fulfilled: 25 °C / 60 % RH; 30 °C / 65 % RH; 30 °C / 70 % RH; 30 °C / 75 % RH; 40 °C / 75 % RH; 25 °C / 40 % RH; 30 °C / 35 % RH; 40 °C / NMT 25 % RH

Specification

Specification for Walk-In Stability Chamber
Storage conditions fulfilled	25 °C / 60 % RH; 30 °C / 65 % RH; 30 °C / 70 % RH; 30 °C / 75 % RH; 40 °C / 75 % RH; 25 °C / 40 % RH; 30 °C / 35 % RH; 40 °C / NMT 25 % RH
Construction	Prefabricated modular structure with PUF/Rockwool insulated panels and reinforced floor panel
Interior / exterior material	Interior stainless steel; exterior PPGI/stainless steel
Observation window	Toughened glass window to inspect samples
Racks and trays	Stainless steel racks and trays with adjustable tray heights
Refrigeration	CFC free refrigeration systems
Chamber illumination	LED light with door switch
Control system	7 inch touch screen HMI display and PLC controller system
Data logging	Storage facility up to 21600 readings logged at 1 minute interval
Data logging sensors	4 temperature + 4 RH sensors; in-built data logger (uniformity module)
Door access	Magnetic door lock for password protected door access
Audit trail	Audit trail generation in HMI display

14 further specifications on the full record.

Typical applications

ICH long-term stability storage
Accelerated stability studies
Bulk pharmaceutical sample storage
Retention sample storage

Full record, hazard data and enquiry for Walk-In Stability Chamber →

Walk-In Cooling Chamber, 2–8 °C

Prefabricated modular walk-in cold room holding 2 °C to 8 °C, 4,000 to 80,000 litres, for bulk cold-chain storage of pharmaceuticals and biologicals with PLC touch-screen control and data logging.

Indent

Storage conditions fulfilled: 2 °C to 8 °C

Specification

Specification for Walk-In Cooling Chamber, 2–8 °C
Storage conditions fulfilled	2 °C to 8 °C
Construction	Prefabricated modular structure with PUF/Rockwool insulated panels and reinforced floor panel
Interior / exterior material	Interior stainless steel; exterior PPGI/stainless steel
Observation window	Toughened glass window to inspect samples
Racks and trays	Stainless steel racks and trays with adjustable tray heights
Refrigeration	CFC free refrigeration systems
Chamber illumination	LED light with door switch
Control system	7 inch touch screen HMI display and PLC controller system
Data logging	Storage facility up to 21600 readings logged at 1 minute interval
Data logging sensors	4 temperature + 4 RH sensors; in-built data logger (uniformity module)
Door access	Magnetic door lock for password protected door access
Audit trail	Audit trail generation in HMI display

14 further specifications on the full record.

Typical applications

Cold-chain storage at 2-8 °C
Vaccine and biological product storage
Refrigerated stability storage
Bulk refrigerated sample storage

Full record, hazard data and enquiry for Walk-In Cooling Chamber, 2–8 °C →

Cooling Chamber, 2–8 °C

Cabinet-style refrigerated chamber holding 2 °C to 8 °C in sizes from 92 to 1012 litres, for cold storage of pharmaceutical samples and reagents with PLC touch-screen control and audit-trail logging.

Indent

Storage conditions fulfilled: 2 °C to 8 °C

Specification

Specification for Cooling Chamber, 2–8 °C
Storage conditions fulfilled	2 °C to 8 °C
Control accuracy	± 0.5 °C
Air circulation	Uniform forced-air circulation system across the working chamber
Interior material	Internal chamber fabricated from stainless steel S.S.-304/316 grade
Exterior material	Exterior body fabricated from S.S.-304/316 grade material
Observation door	Full view poly-carbonate observation door to inspect test samples
Racks and trays	Stainless steel racks and trays with adjustable tray heights
Refrigeration	CFC free refrigeration systems
Chamber illumination	LED light with door switch
Mobility	Unit mounted on castor wheels for easy movement
Control system	7 inch touch screen HMI display and PLC controller system
Data logging	Storage facility up to 21600 readings logged at 1 minute interval

16 further specifications on the full record.

Typical applications

Cold-chain storage at 2-8 °C
Vaccine and biological product storage
Refrigerated stability storage
Laboratory reagent and sample storage
Hospital and blood-bank cold storage

Full record, hazard data and enquiry for Cooling Chamber, 2–8 °C →