Paddle Blender Homogeniser, 400 mL, Heated
Paddle blender that works the sample inside a closed sterile bag, so the initial suspension is prepared without any part of the machine touching the sample.
Typical applications
- Preparation of initial suspensions for microbiological examination
- Food and dairy testing
- Environmental sample preparation
- Pharmaceutical microbiology
- Life-science research sample preparation
Conforms to
- ISO 6887-1—Microbiology of the food chain — Preparation of test samples, initial suspension and decimal dilutions for microbiological examination — Part 1: General rules
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
Nothing on this machine touches the sample. The material is worked inside a closed sterile bag by paddles that stay outside it, so there is no probe to strip and clean and no carry-over between samples — that, not speed, is why a microbiology laboratory buys a paddle blender instead of a rotor-stator homogeniser. The cost that follows you is the bags: 400 mL bags to suit the 170 x 300 mm chamber are a per-sample consumable and only 50 sample covers ship with the machine, so put bags on the same purchase order and decide up front whether you need the filter-membrane type, which lets you pipette the suspension straight out without straining. The 80 °C heating is for warming the diluent, and the ultraviolet cycle only treats exposed surfaces of the empty chamber — neither of them sterilises a loaded bag.Specification
| Working capacity | 4 mL to 400 mL |
|---|---|
| Slapping speed | 3.0 to 12.0 squeezes per second |
| Adjustable flapping distance | 0 to 50 mm |
| Paddle size | 145 x 85 mm |
| Paddle and front door material | Stainless steel 304 |
| Heating | RT +5 °C to 80 °C |
| Disinfection wavelength | 253.7 nm ultraviolet |
| Stored programmes | 8 sets, speed and time adjustable |
| Timing, alarm and pause | Yes |
| Automatic stop | Yes |
| Display | 4.3 inch touch screen |
| Sterile homogenising bag size | 170 x 300 mm |
| Body | Stainless steel with anticorrosive plastic coating; glass window in the door |
| Power supply | AC 220 V, 50 Hz |
| Packing dimensions (L x W x H) | 530 x 330 x 455 mm |
| Gross weight | 25 kg |
| HSN code | 84798200 |
| Supplied with | Main instrument, power cord, 50 sample covers, instruction manual, test certificate |
Support available
- Installation & commissioning
- Calibration
- Validation & qualification (IQ/OQ/PQ)
- Operator training
- Annual maintenance contract
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Dispensing Peristaltic Pump, 0.005 to 641 mL/min
Tube-driven pump that meters and transfers liquid without the liquid ever touching the pump, for dispensing, feeding and quantitative transfer duties.
IndentFlow range: 0.005 to 641 mL/min
Specification for Dispensing Peristaltic Pump, 0.005 to 641 mL/min
Specification for Dispensing Peristaltic Pump, 0.005 to 641 mL/min Flow range 0.005 to 641 mL/min Speed range 0.1 to 150 rpm Speed resolution 0.1 rpm at or below 100 rpm; 1 rpm above 100 rpm Speed accuracy < ±0.2 % Pump heads / channels 1 Standard tube 18# Flow at 150 rpm, by tube 13# 7.5, 14# 30, 19# 75, 16# 120, 25# 285, 17# 450, 18# 641 mL/min Flow at 0.1 rpm, by tube 13# 0.0050, 14# 0.020, 19# 0.05, 16# 0.080, 25# 0.19, 17# 0.30, 18# 0.43 mL/min Control functions Start and stop, reversible direction, full speed, speed adjustment, power-down state memory Timer and delay start / stop Available External control External analogue speed regulation and external start/stop and direction signals, 5 to 24 V, physically isolated; voltage or current signal type selectable from the panel Communication interface RS485, MODBUS protocol 12 further specifications on the full record.
Typical applications
- Bacterial and cell culture feed
- Animal heart perfusion
- Liquid addition to synthetic reactions
- Tangential flow ultrafiltration
- Coating and granulation liquid supply
- Laboratory dispensing and quantitative transfer
Also known as
- Peristaltic pump
- Dosing pump
- Tubing pump
- Liquid transfer pump
- Dispensing pump
Full record, hazard data and enquiry for Dispensing Peristaltic Pump, 0.005 to 641 mL/min →
Rotary Evaporator, 1 L Flask, Motorised Lift
Motorised rotary evaporator that strips solvent from a 1 L flask under reduced pressure on a heated bath, with a vertical condenser and a separate collection bottle.
IndentEvaporation capacity (water): Max. 25 mL/min
Specification for Rotary Evaporator, 1 L Flask, Motorised Lift
Specification for Rotary Evaporator, 1 L Flask, Motorised Lift Evaporation capacity (water) Max. 25 mL/min Rotation speed 20 to 300 rpm Evaporating flask 1 L, 131 mm diameter, 29 joint Collection bottle 1 L, 131 mm diameter, 35 joint Condenser Vertical, adjustable double-layer, anti-backflow design; 80 x 420 mm Condensation area 0.15 m² Bath temperature control range RT +5 °C to 180 °C Bath control accuracy ±1 °C Heating power 1.5 kW Enclosed heating size 230 x 135 mm Materials Stainless steel bath liner, aluminium alloy bracket Lifting Automatic lift, 120 mm stroke 11 further specifications on the full record.
Typical applications
- Solvent removal and recovery
- Concentration of extracts
- Sample preparation before chromatography
- Pilot work in pharmaceutical and chemical laboratories
- Food and botanical extract concentration
Also known as
- Rotavap
- Rotary vacuum evaporator
- Rotary film evaporator
- Solvent evaporator
Full record, hazard data and enquiry for Rotary Evaporator, 1 L Flask, Motorised Lift →
Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL
Hand-held rotor-stator disperser that shears a 10 to 250 mL sample in the gap between a spinning rotor and a fixed stator, for homogenising, emulsifying and cell disruption.
IndentWorking capacity: 10 to 250 mL
Specification for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL
Specification for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL Working capacity 10 to 250 mL Minimum processing capacity 10 mL Standard dispersing head 10 mm, stainless steel, removable for cleaning Speed 5,000 to 30,000 rpm Speed mode 6 gears, stepless regulation Maximum viscosity 5000 mPa·s (printed as 5000MPAS) Noise < 50 dB Protection class IP30 Power 160 W Power supply AC 220 V, 50 to 60 Hz Stand H-type stand supplied for hanging the drive Packing dimensions (L x W x H) 480 x 280 x 110 mm 4 further specifications on the full record.
Typical applications
- Tissue and cell disruption
- Emulsion and suspension preparation
- Bio-pharmaceutical and gene research sample preparation
- Cosmetics, inks and paints
- Nanomaterial dispersion
Also known as
- Rotor-stator homogeniser
- Handheld homogeniser
- Disperser
- Immersion homogeniser
- Tissue disperser
Full record, hazard data and enquiry for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL →
Tissue Grinder Homogeniser (Bead Beater), 12 x 5 mL or 24 x 2 mL
Bead-beating tissue grinder that shakes closed tubes loaded with grinding balls to break plant, animal and microbial material into a uniform lysate for nucleic acid and protein work.
IndentTube holder, TGH12 / TGH24: 5 mL x 12 tubes / 2 mL x 24 tubes
Specification for Tissue Grinder Homogeniser (Bead Beater), 12 x 5 mL or 24 x 2 mL
Specification for Tissue Grinder Homogeniser (Bead Beater), 12 x 5 mL or 24 x 2 mL Tube holder, TGH12 / TGH24 5 mL x 12 tubes / 2 mL x 24 tubes Tube holders illustrated 5 mL x 12, 2 mL x 24 and 2 mL x 48; only the 12 and 24 holders are named in the specification table Maximum speed 2500 rpm Frequency setting 30 to 70 Hz Sample crushing vibration 600 to 2100 times/min Fixture stroke 32 mm, vertical Rated power 375 W Frequency tracking Automatic Display Touch screen Time setting and pause setting Yes Lock Outside lock, yes Alarm and storage Automatic fault alarm; automatic programme storage 6 further specifications on the full record.
Typical applications
- Sample preparation for DNA and RNA extraction
- Protein extraction
- Plant and animal tissue grinding
- Bacteria and yeast disruption
- Dry grinding, wet grinding and mixing
Also known as
- Bead beater
- Bead mill homogeniser
- Tissue lyser
- Sample grinder
- Tissue homogeniser
