Rotary Evaporator, 1 L Flask, Motorised Lift
Motorised rotary evaporator that strips solvent from a 1 L flask under reduced pressure on a heated bath, with a vertical condenser and a separate collection bottle.
Typical applications
- Solvent removal and recovery
- Concentration of extracts
- Sample preparation before chromatography
- Pilot work in pharmaceutical and chemical laboratories
- Food and botanical extract concentration
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
This is the evaporator body only and it will not work without two things that are quoted separately: a vacuum source and a cold supply for the condenser. The catalogue itself lists the vacuum pump and the water chiller as extra-cost essential accessories, so quote all three together or the unit sits idle on delivery. Match the pump to the solvent — a chemically resistant diaphragm pump is the usual choice for acids and chlorinated solvents — and remember it is the vacuum you can hold, not the bath, that decides the temperature you can distil at. The 25 mL/min figure is for water; low boilers run faster and high boilers a great deal slower. The flask, collection bottle and PTFE seal are ground-joint consumables, so keep spares.Specification
| Evaporation capacity (water) | Max. 25 mL/min |
|---|---|
| Rotation speed | 20 to 300 rpm |
| Evaporating flask | 1 L, 131 mm diameter, 29 joint |
| Collection bottle | 1 L, 131 mm diameter, 35 joint |
| Condenser | Vertical, adjustable double-layer, anti-backflow design; 80 x 420 mm |
| Condensation area | 0.15 m² |
| Bath temperature control range | RT +5 °C to 180 °C |
| Bath control accuracy | ±1 °C |
| Heating power | 1.5 kW |
| Enclosed heating size | 230 x 135 mm |
| Materials | Stainless steel bath liner, aluminium alloy bracket |
| Lifting | Automatic lift, 120 mm stroke |
| Rotating power | 40 W |
| Sealing method | PTFE and fluorine rubber bi-directional seal |
| Valves | PTFE feed valve; automatic switching valve for continuous collection; PTFE discharge valve |
| Auto stop | Yes, printed as 'if set temperature exceeds 5 °C' |
| Display and control | LCD display, knob and keypad control |
| Power supply | AC 220 V, 50/60 Hz |
| Packing dimensions (L x W x H) | 770 x 610 x 765 mm |
| Gross weight | 35 kg |
| HSN code | 84198990 |
| Supplied with | Main instrument, water bath, 1 L distillation flask, 1 L collection bottle, condenser and fitting accessories, power cord, instruction manual, test certificate |
Support available
- Installation & commissioning
- Calibration
- Operator training
- Annual maintenance contract
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Dispensing Peristaltic Pump, 0.005 to 641 mL/min
Tube-driven pump that meters and transfers liquid without the liquid ever touching the pump, for dispensing, feeding and quantitative transfer duties.
IndentFlow range: 0.005 to 641 mL/min
Specification for Dispensing Peristaltic Pump, 0.005 to 641 mL/min
Specification for Dispensing Peristaltic Pump, 0.005 to 641 mL/min Flow range 0.005 to 641 mL/min Speed range 0.1 to 150 rpm Speed resolution 0.1 rpm at or below 100 rpm; 1 rpm above 100 rpm Speed accuracy < ±0.2 % Pump heads / channels 1 Standard tube 18# Flow at 150 rpm, by tube 13# 7.5, 14# 30, 19# 75, 16# 120, 25# 285, 17# 450, 18# 641 mL/min Flow at 0.1 rpm, by tube 13# 0.0050, 14# 0.020, 19# 0.05, 16# 0.080, 25# 0.19, 17# 0.30, 18# 0.43 mL/min Control functions Start and stop, reversible direction, full speed, speed adjustment, power-down state memory Timer and delay start / stop Available External control External analogue speed regulation and external start/stop and direction signals, 5 to 24 V, physically isolated; voltage or current signal type selectable from the panel Communication interface RS485, MODBUS protocol 12 further specifications on the full record.
Typical applications
- Bacterial and cell culture feed
- Animal heart perfusion
- Liquid addition to synthetic reactions
- Tangential flow ultrafiltration
- Coating and granulation liquid supply
- Laboratory dispensing and quantitative transfer
Also known as
- Peristaltic pump
- Dosing pump
- Tubing pump
- Liquid transfer pump
- Dispensing pump
Full record, hazard data and enquiry for Dispensing Peristaltic Pump, 0.005 to 641 mL/min →
Paddle Blender Homogeniser, 400 mL, Heated
Paddle blender that works the sample inside a closed sterile bag, so the initial suspension is prepared without any part of the machine touching the sample.
IndentISO 6887-1Working capacity: 4 mL to 400 mL
Specification for Paddle Blender Homogeniser, 400 mL, Heated
Specification for Paddle Blender Homogeniser, 400 mL, Heated Working capacity 4 mL to 400 mL Slapping speed 3.0 to 12.0 squeezes per second Adjustable flapping distance 0 to 50 mm Paddle size 145 x 85 mm Paddle and front door material Stainless steel 304 Heating RT +5 °C to 80 °C Disinfection wavelength 253.7 nm ultraviolet Stored programmes 8 sets, speed and time adjustable Timing, alarm and pause Yes Automatic stop Yes Display 4.3 inch touch screen Sterile homogenising bag size 170 x 300 mm 7 further specifications on the full record.
Standards
ISO 6887-1Typical applications
- Preparation of initial suspensions for microbiological examination
- Food and dairy testing
- Environmental sample preparation
- Pharmaceutical microbiology
- Life-science research sample preparation
Also known as
- Bag mixer
- Laboratory blender
- Sterile bag homogeniser
- Paddle blender
- Microbiological sample blender
Full record, hazard data and enquiry for Paddle Blender Homogeniser, 400 mL, Heated →
Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL
Hand-held rotor-stator disperser that shears a 10 to 250 mL sample in the gap between a spinning rotor and a fixed stator, for homogenising, emulsifying and cell disruption.
IndentWorking capacity: 10 to 250 mL
Specification for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL
Specification for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL Working capacity 10 to 250 mL Minimum processing capacity 10 mL Standard dispersing head 10 mm, stainless steel, removable for cleaning Speed 5,000 to 30,000 rpm Speed mode 6 gears, stepless regulation Maximum viscosity 5000 mPa·s (printed as 5000MPAS) Noise < 50 dB Protection class IP30 Power 160 W Power supply AC 220 V, 50 to 60 Hz Stand H-type stand supplied for hanging the drive Packing dimensions (L x W x H) 480 x 280 x 110 mm 4 further specifications on the full record.
Typical applications
- Tissue and cell disruption
- Emulsion and suspension preparation
- Bio-pharmaceutical and gene research sample preparation
- Cosmetics, inks and paints
- Nanomaterial dispersion
Also known as
- Rotor-stator homogeniser
- Handheld homogeniser
- Disperser
- Immersion homogeniser
- Tissue disperser
Full record, hazard data and enquiry for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL →
Tissue Grinder Homogeniser (Bead Beater), 12 x 5 mL or 24 x 2 mL
Bead-beating tissue grinder that shakes closed tubes loaded with grinding balls to break plant, animal and microbial material into a uniform lysate for nucleic acid and protein work.
IndentTube holder, TGH12 / TGH24: 5 mL x 12 tubes / 2 mL x 24 tubes
Specification for Tissue Grinder Homogeniser (Bead Beater), 12 x 5 mL or 24 x 2 mL
Specification for Tissue Grinder Homogeniser (Bead Beater), 12 x 5 mL or 24 x 2 mL Tube holder, TGH12 / TGH24 5 mL x 12 tubes / 2 mL x 24 tubes Tube holders illustrated 5 mL x 12, 2 mL x 24 and 2 mL x 48; only the 12 and 24 holders are named in the specification table Maximum speed 2500 rpm Frequency setting 30 to 70 Hz Sample crushing vibration 600 to 2100 times/min Fixture stroke 32 mm, vertical Rated power 375 W Frequency tracking Automatic Display Touch screen Time setting and pause setting Yes Lock Outside lock, yes Alarm and storage Automatic fault alarm; automatic programme storage 6 further specifications on the full record.
Typical applications
- Sample preparation for DNA and RNA extraction
- Protein extraction
- Plant and animal tissue grinding
- Bacteria and yeast disruption
- Dry grinding, wet grinding and mixing
Also known as
- Bead beater
- Bead mill homogeniser
- Tissue lyser
- Sample grinder
- Tissue homogeniser
