Laboratory supply

Patel Chemhub Private Limited
Indent

Walk-In BOD Incubator

Prefabricated modular walk-in incubator operating from 5 °C to 60 °C, 4,000 to 80,000 litres, for bulk biochemical oxygen demand testing and microbiological incubation in water, food and pharma laboratories.

Typical applications

  • Biochemical oxygen demand (BOD) testing
  • Microbiological culture incubation
  • Bulk controlled-temperature incubation
  • Water and effluent analysis laboratories

Add to enquiry

Enquire on WhatsApp

Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.

Worth knowing before you order

The manufacturer also prints an ICH guideline with no number stated in the brochure, ISO 9001:2015 (certificate, not a test method). Those are not test methods for this instrument, so they are not listed as conformity above — ask us for the certificate itself if you need it.

Specification

Storage conditions fulfilled5 °C to 60 °C
ConstructionPrefabricated modular structure with PUF/Rockwool insulated panels and reinforced floor panel
Interior / exterior materialInterior stainless steel; exterior PPGI/stainless steel
Observation windowToughened glass window to inspect samples
Racks and traysStainless steel racks and trays with adjustable tray heights
RefrigerationCFC free refrigeration systems
Chamber illuminationLED light with door switch
Control system7 inch touch screen HMI display and PLC controller system
Data loggingStorage facility up to 21600 readings logged at 1 minute interval
Data logging sensors4 temperature + 4 RH sensors; in-built data logger (uniformity module)
Door accessMagnetic door lock for password protected door access
Audit trailAudit trail generation in HMI display
Power failure recoveryAuto resume after power failure (main as well as UPS)
User access levelsThree level operation - Admin, Supervisor and General, with fixed access rights
RedundancyStandby refrigeration system; auto switch over facility and calendar programming for mains and standby system
Remote alertGSM module (mobile alert configuration) system
PC softwareCompatible with 21 CFR Part 11 compliance PC data-acquisition software
Safety provisionsOver temperature cutoff system; electrical overload cutoff system; time delay for compressor switch on
Working chamber 2.00 x 1.00 x 2.00 mCapacity 4000 litres; 8 trays
Working chamber 2.00 x 1.50 x 2.00 mCapacity 6000 litres; 12 trays
Working chamber 2.00 x 2.00 x 2.00 mCapacity 8000 litres; 24 trays
Working chamber 2.00 x 2.50 x 2.50 mCapacity 12500 litres; 28 trays
Working chamber 2.50 x 3.00 x 2.50 mCapacity 18750 litres; 36 trays
Working chamber 3.10 x 3.00 x 2.50 mCapacity 23250 litres; 40 trays

Site preparation required

This instrument needs site work before delivery — typically a level grouted foundation, a dedicated power supply, and in some cases drainage or extraction. We issue the foundation drawing and utility schedule with the quotation so the civil work runs in parallel with the lead time.

Support available

  • Validation & qualification (IQ/OQ/PQ)

Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.

Related products