Industrial Ultrasonic Cleaner, 50 L and 100 L, Sweep Frequency
Floor-standing stainless ultrasonic cleaner in 50 L and 100 L tank sizes with a separate sweep-frequency generator, adjustable ultrasonic power, a 100 °C heater and a drain valve.
Typical applications
- Bulk degreasing of machined components
- Cleaning large glassware and process parts
- Automotive and engineering parts cleaning
- Cleaning tooling, moulds and filters
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
The ultrasonic generator is a separate box with its own power cable and a two-pin connector, so allow space for it beside the tank and check the cable reaches. Both sizes carry a heater larger than the ultrasonic stack - 2000 W on the 50 L and 4000 W on the 100 L, alongside 900 W and 1500 W of ultrasonics - and the catalogue prints a single-phase AC 220 V 50 Hz supply for both, so a dedicated circuit is needed rather than a shared bench socket, and the connected load should be confirmed with the supplier before the electrical work is specified. Both have a drain valve and need somewhere for 50 or 100 L of used solution to go. Sweep frequency is stated for these two and is what stops standing waves parking hot and dead spots in a tank this size. Lid and SS304 basket are supplied.Specification
| Models covered | LMUC50 / LMUC100 |
|---|---|
| Tank capacity (approx.) | 50 L / 100 L |
| Tank size | 500 x 350 x 300 mm / 600 x 500 x 350 mm |
| Overall size | 645 x 496 x 615 mm / 745 x 645 x 665 mm |
| Ultrasonic power | 900 W / 1500 W |
| Ultrasonic power adjustment | 0 to 100%, adjustable |
| Heating power | 2000 W / 4000 W |
| Heating temperature | RT+5 ~ to 100 °C |
| Ultrasonic frequency | 40 kHz |
| Generator | Sweep frequency generator, industrial grade transducer, moisture-proof PCB |
| Time setting | 1-60 min |
| Display | Digital red LED |
| Tank drain | Drain valve |
| Tank construction | SS304, 2 mm tank thickness to resist acid and corrosion |
| Lid, inner tank and outside tank material | SS304 |
| Mobility | Wheels, with locking wheels for stability |
| Power supply | AC 220V 50Hz |
| Packing dimension (LxWxH) | 810 x 620 x 795 mm / 910 x 755 x 840 mm |
| Gross weight | 87 kg / 113 kg |
| HSN code | 84562000 |
Site preparation required
This instrument needs site work before delivery — typically a level grouted foundation, a dedicated power supply, and in some cases drainage or extraction. We issue the foundation drawing and utility schedule with the quotation so the civil work runs in parallel with the lead time.Support available
- Installation & commissioning
- Operator training
- Annual maintenance contract
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Dispensing Peristaltic Pump, 0.005 to 641 mL/min
Tube-driven pump that meters and transfers liquid without the liquid ever touching the pump, for dispensing, feeding and quantitative transfer duties.
IndentFlow range: 0.005 to 641 mL/min
Specification for Dispensing Peristaltic Pump, 0.005 to 641 mL/min
Specification for Dispensing Peristaltic Pump, 0.005 to 641 mL/min Flow range 0.005 to 641 mL/min Speed range 0.1 to 150 rpm Speed resolution 0.1 rpm at or below 100 rpm; 1 rpm above 100 rpm Speed accuracy < ±0.2 % Pump heads / channels 1 Standard tube 18# Flow at 150 rpm, by tube 13# 7.5, 14# 30, 19# 75, 16# 120, 25# 285, 17# 450, 18# 641 mL/min Flow at 0.1 rpm, by tube 13# 0.0050, 14# 0.020, 19# 0.05, 16# 0.080, 25# 0.19, 17# 0.30, 18# 0.43 mL/min Control functions Start and stop, reversible direction, full speed, speed adjustment, power-down state memory Timer and delay start / stop Available External control External analogue speed regulation and external start/stop and direction signals, 5 to 24 V, physically isolated; voltage or current signal type selectable from the panel Communication interface RS485, MODBUS protocol 12 further specifications on the full record.
Typical applications
- Bacterial and cell culture feed
- Animal heart perfusion
- Liquid addition to synthetic reactions
- Tangential flow ultrafiltration
- Coating and granulation liquid supply
- Laboratory dispensing and quantitative transfer
Also known as
- Peristaltic pump
- Dosing pump
- Tubing pump
- Liquid transfer pump
- Dispensing pump
Full record, hazard data and enquiry for Dispensing Peristaltic Pump, 0.005 to 641 mL/min →
Rotary Evaporator, 1 L Flask, Motorised Lift
Motorised rotary evaporator that strips solvent from a 1 L flask under reduced pressure on a heated bath, with a vertical condenser and a separate collection bottle.
IndentEvaporation capacity (water): Max. 25 mL/min
Specification for Rotary Evaporator, 1 L Flask, Motorised Lift
Specification for Rotary Evaporator, 1 L Flask, Motorised Lift Evaporation capacity (water) Max. 25 mL/min Rotation speed 20 to 300 rpm Evaporating flask 1 L, 131 mm diameter, 29 joint Collection bottle 1 L, 131 mm diameter, 35 joint Condenser Vertical, adjustable double-layer, anti-backflow design; 80 x 420 mm Condensation area 0.15 m² Bath temperature control range RT +5 °C to 180 °C Bath control accuracy ±1 °C Heating power 1.5 kW Enclosed heating size 230 x 135 mm Materials Stainless steel bath liner, aluminium alloy bracket Lifting Automatic lift, 120 mm stroke 11 further specifications on the full record.
Typical applications
- Solvent removal and recovery
- Concentration of extracts
- Sample preparation before chromatography
- Pilot work in pharmaceutical and chemical laboratories
- Food and botanical extract concentration
Also known as
- Rotavap
- Rotary vacuum evaporator
- Rotary film evaporator
- Solvent evaporator
Full record, hazard data and enquiry for Rotary Evaporator, 1 L Flask, Motorised Lift →
Paddle Blender Homogeniser, 400 mL, Heated
Paddle blender that works the sample inside a closed sterile bag, so the initial suspension is prepared without any part of the machine touching the sample.
IndentISO 6887-1Working capacity: 4 mL to 400 mL
Specification for Paddle Blender Homogeniser, 400 mL, Heated
Specification for Paddle Blender Homogeniser, 400 mL, Heated Working capacity 4 mL to 400 mL Slapping speed 3.0 to 12.0 squeezes per second Adjustable flapping distance 0 to 50 mm Paddle size 145 x 85 mm Paddle and front door material Stainless steel 304 Heating RT +5 °C to 80 °C Disinfection wavelength 253.7 nm ultraviolet Stored programmes 8 sets, speed and time adjustable Timing, alarm and pause Yes Automatic stop Yes Display 4.3 inch touch screen Sterile homogenising bag size 170 x 300 mm 7 further specifications on the full record.
Standards
ISO 6887-1Typical applications
- Preparation of initial suspensions for microbiological examination
- Food and dairy testing
- Environmental sample preparation
- Pharmaceutical microbiology
- Life-science research sample preparation
Also known as
- Bag mixer
- Laboratory blender
- Sterile bag homogeniser
- Paddle blender
- Microbiological sample blender
Full record, hazard data and enquiry for Paddle Blender Homogeniser, 400 mL, Heated →
Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL
Hand-held rotor-stator disperser that shears a 10 to 250 mL sample in the gap between a spinning rotor and a fixed stator, for homogenising, emulsifying and cell disruption.
IndentWorking capacity: 10 to 250 mL
Specification for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL
Specification for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL Working capacity 10 to 250 mL Minimum processing capacity 10 mL Standard dispersing head 10 mm, stainless steel, removable for cleaning Speed 5,000 to 30,000 rpm Speed mode 6 gears, stepless regulation Maximum viscosity 5000 mPa·s (printed as 5000MPAS) Noise < 50 dB Protection class IP30 Power 160 W Power supply AC 220 V, 50 to 60 Hz Stand H-type stand supplied for hanging the drive Packing dimensions (L x W x H) 480 x 280 x 110 mm 4 further specifications on the full record.
Typical applications
- Tissue and cell disruption
- Emulsion and suspension preparation
- Bio-pharmaceutical and gene research sample preparation
- Cosmetics, inks and paints
- Nanomaterial dispersion
Also known as
- Rotor-stator homogeniser
- Handheld homogeniser
- Disperser
- Immersion homogeniser
- Tissue disperser
Full record, hazard data and enquiry for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL →
