Laboratory supply

Patel Chemhub Private Limited
Indent

Probe Sonicator, 650 W, Acoustic Enclosure with Remote Sample Lift

Ultrasonic probe processor in a lit, UV-equipped acoustic enclosure whose sample stand is raised and lowered by remote control, so the cabinet stays shut while the probe depth is set.

Typical applications

  • Cell and tissue disruption
  • Emulsification and dispersion
  • Extraction from solids
  • Nanoparticle dispersion
  • Sample preparation for infectious or aerosol-generating material

Add to enquiry

Enquire on WhatsApp

Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.

Worth knowing before you order

The electrical end of this unit is the same 650 W, 20 to 25 kHz generator as the plain touch-screen model; what the extra money buys is the cabinet — a remote-controlled sample lift that lets you set the probe depth without opening the door, a built-in lamp and a UV cycle. That is worth having for infectious or aerosol-generating work, where opening a running enclosure is precisely what you want to avoid. Everything else about probe sonication still applies: the horn goes into the liquid and cavitation dumps heat into a small volume, so work in an ice bath and pulse rather than run continuously; an unhoused horn at this power is loud enough to damage hearing; the titanium tip erodes into the sample and needs re-facing or replacement; and the probe diameter sets the volume, with the 6 mm horn supplied covering 10 to 100 mL. Two costs sit outside the quotation: the jacketed circulating beaker only circulates if you buy a recirculating chiller to feed it, and the catalogue asks that the unit be run through a voltage stabiliser.

Specification

Frequency20 to 25 kHz, automatic tracking
Power6.5 to 650 W, adjustable; output amplitude 0 to 100 %
Crushing and mixing capacity0.2 to 500 mL
Standard probe6 mm, for 10 to 100 mL samples
Optional probes2, 3, 6, 8, 10 and 12 mm
Volume by probe diameter2 mm 0.2-5 mL, 3 mm 3-10 mL, 6 mm 10-100 mL, 8 mm 20-200 mL, 10 mm 30-300 mL, 12 mm 50-500 mL
Power ratio by probe diameter2 mm 1-35 %, 3 mm 1-45 %, 6 mm 1-70 %, 8 mm 1-80 %, 10 mm 1-90 %, 12 mm 10-90 %
Probe materialTitanium alloy
Temperature rangeAmbient to 100 °C
Single ultrasound time0.1 to 99.9 s
Display7 inch touch screen; temperature, power, time and graph
Data storage20 sets
Remote controlRF remote raises and lowers the sample stand
Acoustic enclosureSoundproof enclosure with built-in LED light and ultraviolet sterilisation; 515 x 320 x 320 mm, 13 kg
Enclosure materialsAnti-corrosive and ABS soundproof box; aluminium alloy and ABS ultrasonic cabinet
Sample handlingCirculating glass beaker supplied as standard
Alarm systemTime, overload, no-load and over-temperature; voice fault alarm
Password protectionYes
Power supplyAC 220 V, 50/60 Hz
Fuse5 A
Packing dimensions (L x W x H)520 x 430 x 360 mm
Gross weight19 kg
HSN code84798200
Supplied withMain instrument, transducer with 6 mm probe, temperature probe, power cable, soundproof box set, 5 A fuse, lamp control cable, transducer connecting cable, RF remote, beaker stand pad, circulating glass beaker, instruction manual, test certificate

Support available

  • Installation & commissioning
  • Operator training
  • Annual maintenance contract
  • Spares & consumables

Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.

Related products