Water Bath Magnetic Stirrer, 3 L
Stainless steel water bath with a magnetic stirrer under the tank, for holding a flask or beaker at a set temperature up to 100 °C while its contents are stirred.
Typical applications
- Heated stirring of aqueous samples
- Dissolution and extraction below 100 °C
- Enzyme and buffer incubation with mixing
- Sample warming before analysis
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
A water bath stops at 100 °C and in practice below it, because the fluid boils away; anything above that needs the oil bath stirrer on page 124. The bath fluid is the whole heat path, so the tank must be filled before the heater is switched on - the anti-dry-burning cut-out is fitted because running one dry is how these are usually destroyed. Stability is quoted at ±1 °C, which is a bath figure and not what a jacketed circulator would give if the method needs tighter control. An ABS top cover and one stir bar are supplied; vessel holders are not.Specification
| Maximum mixing volume | 3 L (2 L flask or 3 L beaker) |
|---|---|
| Tank size (L x W x depth) | 200 x 200 x 130 mm |
| Tank | Stainless steel inner tank with built-in heating tube |
| Temperature range | RT +5 °C ~ 100 °C |
| Temperature resolution and stability | 0.1 °C and ±1 °C |
| Temperature control | PID |
| Dry-run protection | Anti dry burning function |
| Speed | 100 RPM ~ 1200 RPM |
| Speed increment | 50 RPM |
| Motor | Brushless |
| Control mode | Digital control panel keys |
| Time setting | Yes |
| Display | LCD |
| Cover | Transparent long cover, ABS |
| Power | 800 W |
| Power supply | AC 220V / 50-60Hz |
| Packing dimension (LxWxH) | 300 x 300 x 250 mm |
| Gross weight | 4 kg |
| HSN code | 84798200 |
Support available
- Installation & commissioning
- Calibration
- Operator training
- Annual maintenance contract
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Dispensing Peristaltic Pump, 0.005 to 641 mL/min
Tube-driven pump that meters and transfers liquid without the liquid ever touching the pump, for dispensing, feeding and quantitative transfer duties.
IndentFlow range: 0.005 to 641 mL/min
Specification for Dispensing Peristaltic Pump, 0.005 to 641 mL/min
Specification for Dispensing Peristaltic Pump, 0.005 to 641 mL/min Flow range 0.005 to 641 mL/min Speed range 0.1 to 150 rpm Speed resolution 0.1 rpm at or below 100 rpm; 1 rpm above 100 rpm Speed accuracy < ±0.2 % Pump heads / channels 1 Standard tube 18# Flow at 150 rpm, by tube 13# 7.5, 14# 30, 19# 75, 16# 120, 25# 285, 17# 450, 18# 641 mL/min Flow at 0.1 rpm, by tube 13# 0.0050, 14# 0.020, 19# 0.05, 16# 0.080, 25# 0.19, 17# 0.30, 18# 0.43 mL/min Control functions Start and stop, reversible direction, full speed, speed adjustment, power-down state memory Timer and delay start / stop Available External control External analogue speed regulation and external start/stop and direction signals, 5 to 24 V, physically isolated; voltage or current signal type selectable from the panel Communication interface RS485, MODBUS protocol 12 further specifications on the full record.
Typical applications
- Bacterial and cell culture feed
- Animal heart perfusion
- Liquid addition to synthetic reactions
- Tangential flow ultrafiltration
- Coating and granulation liquid supply
- Laboratory dispensing and quantitative transfer
Also known as
- Peristaltic pump
- Dosing pump
- Tubing pump
- Liquid transfer pump
- Dispensing pump
Full record, hazard data and enquiry for Dispensing Peristaltic Pump, 0.005 to 641 mL/min →
Rotary Evaporator, 1 L Flask, Motorised Lift
Motorised rotary evaporator that strips solvent from a 1 L flask under reduced pressure on a heated bath, with a vertical condenser and a separate collection bottle.
IndentEvaporation capacity (water): Max. 25 mL/min
Specification for Rotary Evaporator, 1 L Flask, Motorised Lift
Specification for Rotary Evaporator, 1 L Flask, Motorised Lift Evaporation capacity (water) Max. 25 mL/min Rotation speed 20 to 300 rpm Evaporating flask 1 L, 131 mm diameter, 29 joint Collection bottle 1 L, 131 mm diameter, 35 joint Condenser Vertical, adjustable double-layer, anti-backflow design; 80 x 420 mm Condensation area 0.15 m² Bath temperature control range RT +5 °C to 180 °C Bath control accuracy ±1 °C Heating power 1.5 kW Enclosed heating size 230 x 135 mm Materials Stainless steel bath liner, aluminium alloy bracket Lifting Automatic lift, 120 mm stroke 11 further specifications on the full record.
Typical applications
- Solvent removal and recovery
- Concentration of extracts
- Sample preparation before chromatography
- Pilot work in pharmaceutical and chemical laboratories
- Food and botanical extract concentration
Also known as
- Rotavap
- Rotary vacuum evaporator
- Rotary film evaporator
- Solvent evaporator
Full record, hazard data and enquiry for Rotary Evaporator, 1 L Flask, Motorised Lift →
Paddle Blender Homogeniser, 400 mL, Heated
Paddle blender that works the sample inside a closed sterile bag, so the initial suspension is prepared without any part of the machine touching the sample.
IndentISO 6887-1Working capacity: 4 mL to 400 mL
Specification for Paddle Blender Homogeniser, 400 mL, Heated
Specification for Paddle Blender Homogeniser, 400 mL, Heated Working capacity 4 mL to 400 mL Slapping speed 3.0 to 12.0 squeezes per second Adjustable flapping distance 0 to 50 mm Paddle size 145 x 85 mm Paddle and front door material Stainless steel 304 Heating RT +5 °C to 80 °C Disinfection wavelength 253.7 nm ultraviolet Stored programmes 8 sets, speed and time adjustable Timing, alarm and pause Yes Automatic stop Yes Display 4.3 inch touch screen Sterile homogenising bag size 170 x 300 mm 7 further specifications on the full record.
Standards
ISO 6887-1Typical applications
- Preparation of initial suspensions for microbiological examination
- Food and dairy testing
- Environmental sample preparation
- Pharmaceutical microbiology
- Life-science research sample preparation
Also known as
- Bag mixer
- Laboratory blender
- Sterile bag homogeniser
- Paddle blender
- Microbiological sample blender
Full record, hazard data and enquiry for Paddle Blender Homogeniser, 400 mL, Heated →
Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL
Hand-held rotor-stator disperser that shears a 10 to 250 mL sample in the gap between a spinning rotor and a fixed stator, for homogenising, emulsifying and cell disruption.
IndentWorking capacity: 10 to 250 mL
Specification for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL
Specification for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL Working capacity 10 to 250 mL Minimum processing capacity 10 mL Standard dispersing head 10 mm, stainless steel, removable for cleaning Speed 5,000 to 30,000 rpm Speed mode 6 gears, stepless regulation Maximum viscosity 5000 mPa·s (printed as 5000MPAS) Noise < 50 dB Protection class IP30 Power 160 W Power supply AC 220 V, 50 to 60 Hz Stand H-type stand supplied for hanging the drive Packing dimensions (L x W x H) 480 x 280 x 110 mm 4 further specifications on the full record.
Typical applications
- Tissue and cell disruption
- Emulsion and suspension preparation
- Bio-pharmaceutical and gene research sample preparation
- Cosmetics, inks and paints
- Nanomaterial dispersion
Also known as
- Rotor-stator homogeniser
- Handheld homogeniser
- Disperser
- Immersion homogeniser
- Tissue disperser
Full record, hazard data and enquiry for Hand-Held Rotor-Stator Homogeniser, 10 to 250 mL →
