Antistatic Ioniser for Balances, External and Windshield-Mounted
Bench ioniser that neutralises electrostatic charge on samples, containers and balance windshields, where static causes drifting and non-repeating readings on 0.01 and 0.1 mg balances.
Typical applications
- Neutralising charge on plastic and glass weighing vessels
- Weighing dry powders that creep or scatter
- Weighing filters, films and plastic parts
- Semi-micro and micro weighing in dry air
- Handling toxic powders that must not disperse
Add to enquiry
Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.
Worth knowing before you order
This is an accessory, not a balance, and except on the 6.1 g micro balance in this range, which is supplied with one, it is quoted as a separate line item. It earns its place when readings will not settle: a charged plastic weighing boat or a dry glass vial pulls on the pan electrostatically, which shows up as a slow one-way drift or as a different answer each time the door is closed, and on a 0.01 or 0.1 mg balance that force is easily larger than the quantity being weighed. The two versions are not interchangeable — the external unit stands beside any balance, the other mounts on the windshield and is listed for five named models in this range only, so confirm the fit against the balance before ordering. The unit generates ozone, quoted at up to 0.05 ppm measured 2 cm from the source, which is small but not nothing in a closed, unventilated weighing room. The catalogue prints a maximum air volume of '0.06 cm3/min', which is not a credible figure for a fan-assisted unit, so it has been left out here rather than reproduced. The pages carry an 'ISO 9001:2015 company' line, which is the factory's management-system certificate and not a product approval.Specification
| Item type | Accessory for micro, semi-micro and analytical balances; not a weighing instrument |
|---|---|
| Design type, two versions | External free-standing device / unit attached to the balance windshield |
| Balance compatibility, external version | Any make of micro, semi-micro or analytical balance |
| Balance compatibility, windshield version | Listed for five specific balances in this range: the 220 g keypad analytical, the 82 g / 220 g and 102 g / 220 g semi-micro models, and the 220 g and 102 g / 220 g touch-screen models |
| Operating modes | 2-minute timed mode and continuous mode, started by a button |
| Distance, sample to ion source | Approx. 5-40 cm |
| Discharge time | 9 s at 5 cm, 13 s at 10 cm, 100 s at 40 cm (fan on) |
| Ozone concentration | 0-0.05 ppm at 2 cm from the ion source |
| Ambient temperature | 10 °C - 40 °C |
| Air humidity | 20-80% |
| Power supply | Adaptor, AC 100-240 V, 50/60 Hz |
| Gross weight | 300 g |
Support available
- Installation & commissioning
- Spares & consumables
Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.
Related products
Micro Balance, 6.1 g x 0.001 mg, Touch Screen
Micro balance reading in 0.001 mg steps over a 6.1 g range, with motorised internal calibration and a double windshield, for weighing reference standards and sub-milligram samples.
IndentCapacity × readability: 6.1 g × 0.001 mg
Specification for Micro Balance, 6.1 g x 0.001 mg, Touch Screen
Specification for Micro Balance, 6.1 g x 0.001 mg, Touch Screen Capacity × readability 6.1 g × 0.001 mg Readability (d) 0.001 mg Repeatability (standard deviation) 0.004 mg Linearity (±) 0.005 mg Calibration Automatic internal (motorised) calibration Display 5" touch screen, seven-language interface Response time ≤ 8 s Pan size 30 mm Weighing chamber size 165 x 165 x 75 mm Distance pan to top windshield 75 mm Windshield internal diameter 165 mm Windshield Double windshield, metal-evaporated coating to reduce static charge 12 further specifications on the full record.
Typical applications
- Weighing reference standards and impurity standards
- Sub-milligram sample preparation for trace analysis
- Filter and particulate gravimetry
- Calibration weight checking
- Research-scale synthesis
Also known as
- Microbalance
- 1 microgram balance
- 0.001 mg balance
- Micro analytical balance
- 6.1 g microbalance
Full record, hazard data and enquiry for Micro Balance, 6.1 g x 0.001 mg, Touch Screen →
Semi-Micro / Analytical Balance, Touch Screen, 102 g / 220 g
Dual-range semi-micro and analytical balance reading to 0.01 mg on the 102 g range and 0.1 mg on the 220 g range, with internal calibration, a 5-inch touch screen and a GLP database.
IndentCapacity × readability: 102 g × 0.01 mg (semi-micro range); 220 g × 0.1 mg (analytical range)
Specification for Semi-Micro / Analytical Balance, Touch Screen, 102 g / 220 g
Specification for Semi-Micro / Analytical Balance, Touch Screen, 102 g / 220 g Capacity × readability 102 g × 0.01 mg (semi-micro range); 220 g × 0.1 mg (analytical range) Repeatability (standard deviation) 0.01 mg on the 102 g range; 0.1 mg on the 220 g range Linearity (±) 0.04 mg on the 102 g range; 0.4 mg on the 220 g range Sensitivity drift 3 ppm/°C Weighing cell Electromagnetic force compensation (EMFC) Calibration Internal calibration Display 5" touch screen Response time ≤ 6 s Pan size 80 mm Windshield dimensions 162 x 171 x 225 mm Operating temperature 15 °C - 25 °C Application modes Piece counting with statistics report, textile function, percentage, check weighing, animal weighing, formulation (recipe) 11 further specifications on the full record.
Typical applications
- Reference standard and impurity standard weighing
- Assay and content uniformity sample preparation
- Standard solution preparation
- Formulation and recipe weighing
- Density determination of solids and liquids
- Piece counting of small components
Also known as
- Semi-micro balance
- Touch screen analytical balance
- 0.01 mg balance
- Dual range analytical balance
- 102 g semi-micro balance
Semi-Micro / Analytical Balance, Touch Screen, 81 g / 220 g
Dual-range semi-micro and analytical balance reading to 0.01 mg on the 81 g range and 0.1 mg on the 220 g range, with internal calibration and an antistatic glass windshield.
IndentCapacity × readability: 81 g × 0.01 mg (semi-micro range); 220 g × 0.1 mg (analytical range)
Specification for Semi-Micro / Analytical Balance, Touch Screen, 81 g / 220 g
Specification for Semi-Micro / Analytical Balance, Touch Screen, 81 g / 220 g Capacity × readability 81 g × 0.01 mg (semi-micro range); 220 g × 0.1 mg (analytical range) Repeatability (standard deviation) 0.01 mg on the 81 g range; 0.1 mg on the 220 g range Linearity (±) 0.04 mg on the 81 g range; 0.4 mg on the 220 g range Sensitivity drift (±) 2 ppm/°C Verification scale interval (e) 1 mg Accuracy class as printed Class I Weighing cell Electromagnetic force compensation (EMFC) Calibration Internal calibration Display 4.3" touch screen, time on display, built-in temperature sensor Response time 4-6 s Pan size 90 mm Ø Windshield Glass, antistatic material 13 further specifications on the full record.
Typical applications
- Semi-micro sample and standard weighing
- Standard solution preparation
- Dynamic weighing of unstable loads
- Density determination of solids and liquids
- Piece counting
- Percentage and Σ weighing
Also known as
- Semi-micro balance
- Touch screen semi-micro balance
- 0.01 mg balance
- Dual range analytical balance
- 81 g semi-micro balance
Semi-Micro Balance, 61 g x 0.01 mg
Single-range semi-micro balance reading in 0.01 mg steps to 61 g, with internal calibration triggered by elapsed time and by temperature change, for laboratory and analytical weighing.
IndentCapacity × readability: 61 g × 0.01 mg
Specification for Semi-Micro Balance, 61 g x 0.01 mg
Specification for Semi-Micro Balance, 61 g x 0.01 mg Capacity × readability 61 g × 0.01 mg Linearity (±) 0.04 mg Sensitivity drift 2 ppm/°C Minimum weighing 1 mg Accuracy class as printed Class I Weighing cell Electromagnetic force sensor Calibration Internal calibration, triggered on elapsed time and on temperature change Display LCD, with time and temperature display Response time 4-6 s Pan size Φ 80 mm Tare range Full Ambient temperature 15 °C - 25 °C 9 further specifications on the full record.
Typical applications
- Semi-micro standard and sample weighing
- Standard solution preparation
- Reference material weighing
- Percentage and counting work
- Routine analytical laboratory weighing
Also known as
- Semi-micro balance
- 0.01 mg balance
- 61 g semi-micro balance
- Semi-micro analytical balance
- Ten microgram balance
Full record, hazard data and enquiry for Semi-Micro Balance, 61 g x 0.01 mg →
