Indent

Single-Beam UV-Visible Spectrophotometer, Numeric Keypad

Single-beam UV-visible spectrophotometer with 2 nm bandwidth and a numeric keypad, for standard-curve concentration work and routine fixed-wavelength assay.

Typical applications

  • Concentration measurement against a standard curve
  • Fixed-wavelength quantitative assay
  • Water and effluent colorimetry
  • Teaching and routine quality control
  • Spectrum scanning and kinetics through the PC software

Conforms to

USP <857>
  • USP <857>Ultraviolet-Visible Spectroscopy

Add to enquiry

Enquire on WhatsApp

Add as many products as you need and send one enquiry covering all of them, or send this item on its own. Bulk and drum quantities are quoted on request.

Worth knowing before you order

Single beam: the blank and the sample are read at different moments, so lamp drift lands in the result — re-blank often, and choose a double-beam instrument for scanning or kinetics. Wavelength accuracy here is ± 0.8 nm against ± 0.3 nm on the double-beam models, which matters for any identification test that turns on a peak position; check the tolerance your method allows. Spectrum scanning, kinetics and multi-wavelength results are displayed through the PC software over USB, not on the instrument. The larger cuvette holders that make use of the 5 to 100 mm compartment are optional, as are the Peltier / sipper system and the multi-cell holder; none is included. The baseline flatness row is printed as ± 0.002 A/h, a drift unit rather than a flatness unit, so it has been left out.

Specification

Technical specification for Single-Beam UV-Visible Spectrophotometer, Numeric Keypad
Beam configurationSingle beam, 1200 lines/mm grating
Wavelength range190–1100 nm
Spectral bandwidth2 nm
Wavelength accuracy± 0.8 nm
Wavelength repeatability± 0.2 nm
Wavelength settingAutomatic
Photometric accuracy and repeatability± 0.3 %T; repeatability ± 0.2 %T
Photometric range−0.3 to 3 A; 0–200 %T
Stability± 0.002 A/h at 500 nm
Stray light≤ 0.05 %T
Light sourceDeuterium lamp and tungsten halogen lamp, individually switchable
DetectorSilicon photodiode
Cell holder10 mm four-position cuvette holder
Sample compartmentAccepts 5–100 mm path length cuvettes with optional holders
DisplayLCD
Data outputUSB port; parallel printer port
Power supplyAC 220 V, 50/60 Hz
Packing dimensions (L x W x H)640 x 550 x 400 mm
Gross weight24 kg
Optional accessoriesPeltier / sipper system; multi-cell holder up to 100 mm

Support available

  • Installation & commissioning
  • Calibration
  • Operator training
  • Annual maintenance contract
  • Spares & consumables

Calibration is arranged through NABL-accredited laboratories under the relevant scope. We state the scope and the certificate number on the quotation — see what accreditation actually covers.

Related products